3M™ Flexible Diamond QRS Cloth Sheet 6002J, 2 3/4 in x 5 in M40 Micron Pattern 18

• Works well on a variety of materials: stone, glass, ceramic, metal carbide and composites
• Open dot pattern allows swarf and debris to escape, helping to prevent loading
• Available in three dot patterns, so operators can choose the right abrasive for their unique project needs
• Hook and Loop backing for easy tool attachment
• Flexible backing responds to edges and contours

3M™ Flexible Diamond QRS Cloth Sheet 6002J was designed to tackle hard-to-grind materials like stone, glass, ceramic, metal, carbide and composites. The sharp-cutting diamond mineral and flexible backing make this abrasive a good match for a variety of metalworking applications.

Durability and Long Life
3M’s flexible diamond products, including 3M™ Flexible Diamond QRS Cloth Sheet 6002J, are designed to help you achieve improved finishes on a wide range of hard-to-grind materials — without sacrificing cut rates. A metal bond securely anchors micron-graded diamonds to a premium flexible backing in an open dot pattern. This provides durability and long life, while allowing conformance to a variety of contours. In addition, the open dot pattern produces aggressive cutting action while reducing loading.

Use for a Variety of Metalworking Applications
Flexible Diamond QRS Cloth Sheet 6002J is commonly used for a variety of metalworking applications: finishing, polishing, grinding and stock removal. It’s uniquely suited for contour finishing, because the flexible backing enables the sheet to move forgivingly over the surface. We equipped this diamond abrasive with a hook and loop backing to make for easier abrasive to tool attachment. A series of loops are formed by pulling tufts of material through the scrim backing. Subsequently, these loops attach to hooks on the holder pad (sold separately). The hook and loop backing provides for swift and easy change-out of abrasives, especially when there are multiple abrasives in a sequence.

Three Patterns
Flexible Diamond QRS Cloth Sheet 6002J comes in three patterns:18, B2 and 21. Here’s how to distinguish between the three.18 is a small-dot pattern, designed for fine finishes. It provides the fastest stock removal on very hard materials such as thermal spray coatings and ceramics. B2 is a medium-dot pattern designed for aggressive cutting action and has improved coolant flow, given the spacing of the dots. 21 is the largest dot pattern and it’s ideal for applications where loading is a problem; gaps allow swarf and debris to escape.

Given its dual strength and flexibility, our Flexible Diamond QRS Cloth Sheet 6002J is a great abrasive for your metalworking needs — from grinding to finishing.