Product Description
Scotch-Brite Clean and Strip Bonded Cleaning Brush
- Available in different densities, so operators can choose the right grade for their specific project
- Made with sharp cutting silicon carbide mineral for a fast, sustained cut
- Open web resists loading, contributing to longer abrasive service life
- Open web responds to surface irregularities without altering geometry of the part
- Steel core helps minimize brush's tendency to yield or deflect on the workpiece
Heavy-Duty CleaningAnchor
Among the Scotch-Brite Flap and Cleaning Brushes, the Scotch-Brite Clean and Strip Bonded Cleaning Brush is one of the most aggressive brushes.Anchor
Combining extra coarse (XCS) silicon carbide mineral with hard densities (5, 7) makes this Scotch-Brite brush especially tough and strong. When brought in contact with the workpiece, this brush will not yield or cut as softly other brushes – for example, the Clean & Finish Flap Brush or the High Strength Flap Brush. As operators know, many variables impact which abrasive should be used. For some applications, a lighter, softer abrasive is the best choice. For applications that require heavy-duty cleaning, the Scotch-Brite Clean and Strip Bonded Cleaning Brush is a good choice.Anchor
Anchor
Durable Construction of Scotch-Brite Cleaning BrushesAnchor
3M engineer Scotch-Brite cleaning brushes by attaching circular sections of non-woven material to a cylindrical core. Typical applications for cleaning brushes include coil cleaning prior to coating, deburring, reclaiming sheet and coil and scale / oxide removal. The Scotch-Brite brush has an arbor hole to accommodate a shaft and may be secured in place with a flange and key. It will not fray or splinter when faced with edges. The steel core on the brush keeps it sturdy and adds a level of durability to the brush when it’s run on finishing equipment.
Operators may choose to add a lubricant or coolant when cleaning, because it helps wash away swarf and reduce loading, which extends the brush’s service life.AnchorAnchor
The Many Benefits of Open Web Abrasives
Nonwoven technology makes the Scotch-Brite industrial abrasives unique. A combination of fiber strands, resin, and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, so debris does not clog the mineral.Anchor
Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance, and extremely long service life.
Scotch-Brite products not only enhance productivity, but also increase operator safety by reducing the need for cleaning chemicals and pastes, and replacing wire brushes that can break off and cause injury. From aesthetic finishing to weld blending, deburring, and more, Scotch-Brite abrasives work fast and deliver consistent results, part after part.
Note: When ordering a bonded construction cleaning brush, please allow an additional 1-1/4″ to provide clearance for the 5/8″ lock collars located at both ends of the brush. For instance, if you require 40″ of usable brush width, order a 40″ wide brush. This brush, however, when measured at the core will actually be 41-1/4″ including the lock collars.
For more information about Scotch-Brite Clean and Strip Bonded Cleaning Brush, visit the official 3M website.
About JAM Industrial Supply of Ohio
Locally owned and operated in Canton, OH, JAM Industrial Supply, LLC has been a 3M Premier distributor and industrial supplier for over 20 years. With our vast network of vendors, we are able to supply the industry’s best products, information, delivery and prices to our customers.
Can’t find what you need? Contact us today for assistance.
Buying in bulk? Apply for special discounts on large quantity orders.
Additional information
| Unit of Measure | |
|---|---|
| Product Id | |
| Part Number | |
| UPC | |
| Weight | 237 lbs |
| Make to Order | |
| Brand | |
| Center Hole Diameter | |
| Diameter | |
| Width | |
| Abrasive Material | Silicon Carbide |
| Density | |
| Grade | |
| Maximum Speed | 1200 rpm |
| Product Form | Cleaning Brush |
| Dimensions | 12.6 × 12.6 × 72.5 in |
