Blog

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ Stamark™ Pavement Marking Tape A270ES can be applied early and late season, down to 40°F (4°C).  Use with 3M™ Stamark™ Surface Preparation Adhesive P-50 or 3M™ Stamark™ Low VOC Surface Preparation Adhesive SPA60.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ Stamark™ Pavement Marking Tape A270ES can be applied early and late season, down to 40°F (4°C).  Use with 3M™ Stamark™ Surface Preparation Adhesive P-50 or 3M™ Stamark™ Low VOC Surface Preparation Adhesive SPA60.

For Industrial Use Only. Estimated Lead Time Is 2 Working Days.

3M™ Stamark™ Pavement Marking Tape A270ES can be applied early and late season, down to 40°F (4°C).  Use with 3M™ Stamark™ Surface Preparation Adhesive P-50 or 3M™ Stamark™ Low VOC Surface Preparation Adhesive SPA60.

For Industrial Use Only. Available December 2025. 

3M File Belt Sander 28366 is ideally suited for a variety of metalworking applications. Grind and blend and finish hard-to-reach areas with power and efficiency.

For Industrial Use Only. Estimated Lead Time Is 15 Working Days.

3M™ Cubitron™ II Stikit™ Film Disc 775L features 3M Precision Shaped Ceramic Grain. The triangular shaped ceramic mineral is designed to slice through the substrate, rather than gouging or “plowing” like conventional abrasives, resulting in a disc that cuts up to 2x as fast and lasts up to 6x as long as conventional abrasives.

For Industrial Use Only. Estimated Lead Time On This Make to Order Belt Is 9 Working Days.

3M™ Trizact™ Cloth Belt 307EA uses proprietary microreplication technology where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a rayon backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

For Industrial Use Only. Lead time on this Make To Order Item is 10 working days.

3M™ Trizact™ Cloth Belt 217EA uses proprietary micro-replication technology in which micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a JE-weight rayon backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

For Industrial Use Only. Lead time on this Make To Order Item is 10 working days.

3M™ Trizact™ Cloth Belt 217EA uses proprietary micro-replication technology in which micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a JE-weight rayon backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

For Industrial Use Only. Estimated Lead Time Is 20 Working Days.

3M™ Fire Barrier Sealant CP 25WB+ is a red, one-component, gun-grade, latex-based, intumescent firestop sealant. This fire barrier sealant helps control the spread of fire, smoke and noxious gases before, during and after exposure to a fire.

For Industrial Use Only. Estimated Lead Time Is 15 Working Days.

3M™ Neoprene Rubber and Gasket Adhesive 1300L,  Yellow 5 Gallon Pour Spout Drum (Pail), is a versatile, solvent based adhesive. It offers high immediate strength and good heat resistance, and is commonly used for bonding most rubber and gasket materials.

For Industrial Use Only. Available After 3/12/2024.

3M™ Scotch-Weld™ PUR Easy 250 Preheater is designed to warm 3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Adhesive prior to use. The preheater keeps up to 4 PUR cartridges at optimum temperature for easy swap out.

For Industrial Use Only. Estimated Lead Time For This Make To Order Item Is 12 Working Days.

3M™ Trizact™ PSA Film Disc 568XA has all the benefits industrial professionals have come to expect from Trizact™ abrasives, including consistent and sharp cutting action.  Cerium oxide helps with glass defect repair and acrylic solid surface finishing by minimizing gouging.