Blog

3M Super Fast Repair Adhesive is a high performance, two-component, semi-rigid, urethane adhesive. This fast-setting adhesive produces rapid results and offers excellent wide gap filling capabilities. This repair adhesive can be used for a variety of applications, does not run or sag and withstands a wide range of temperatures.

3M Rigid Parts Repair is a two-part epoxy designed for use as a filler and an adhesive. This product is designed to repair SMC, FRP (traditional fiberglass) and other rigid plastic parts. This adhesive filler is easy to sand and formulated for excellent featheredge.

3M Polyurethane Adhesive Sealant 550FC is a moisture-curing sealant that forms flexible, weather-resistant bonds. This single-component adhesive bonds dissimilar materials including plastics, sheet molding compound, aluminum, steel, coated metal, stone, and wood in temperatures ranging from -40 °F (-40 °C) to 194 °F (90 °C). Polyurethane sealants perform well in challenging industrial, transportation, and construction settings by creating durable elastomeric bonds that seal against the elements. To keep the job moving, this fast-curing formula forms a paintable skin in only 60-90 minutes. High tensile strength, weather-resistance, and short cure time allow 3M Polyurethane Adhesive Sealant 550FC to excel in applications such as exterior panel bonding, window framing, and marine manufacturing.

3M Fillet Putty 16035 is a resilient polyester milled fiberglass reinforced compound designed to be applied between gel coat and laminate to fill corners or sharp transitions helping eliminate air voids.

3M Hot Melt Adhesive 3748 is a tough, flexible hot melt adhesive with exceptional low temperature thermal shock properties that is able to provide optimal adhesion in fluctuating temperatures. As a 100% solids thermoplastic resin, this hot melt adhesive offers excellent durability for a wide variety of applications.

3M Foam Fast Spray Adhesive 74 Low VOC <25% is a fast-drying adhesive that bonds foam and fabric to a wide range of substrates. While offering an aggressive tack with a high initial grab and foam-tearing strength, this adhesive allows sufficient open time to position materials properly thanks to its high-solids content and low soak-in properties. It also provides high coverage and helps create soft, non-dimpling glue lines. Additionally, 3M Foam Fast Spray Adhesive 74 CA Low VOC <25% dispenses easily in a lace-spray pattern and applies directly onto surfaces, making it a quick, ‘go-to’, everyday-use solution. This product meets the applicable 2017 California Air Resource Board VOC limits for mist and web spray adhesives.

3M Solvent Spray Nozzle Trigger Head helps apply solvent or water-based detailing chemicals with greater control and convenience.

3M Rigid Pillar Foam is a two part urethane which foams in place to fill posts, pillars, and automotive body cavities with exceptional ease and consistent quality. This foam is easily to apply with a range of manual and pneumatic 3M applicators.

3M Factory-Match Seam Sealer uses two part urethane technology to provide a tough flexible material for the sealing of joints on primed or painted substrates such as steel or aluminum enclosures. This material provides excellent flexibility and elongation properties along with a medium/high viscosity and produces a slight flow-out after application.

Scotch Super Glue Pen contains a fast drying adhesive designed for a wide variety of non porous surfaces. Good for wood, metal, leather, ceramic, rubber…

Scotch Glue Sticks are strong, fast bonding, and no mess. Great for paper, fabrics, and other lightweight items. Cleans off hands and household surfaces with…

3M Heat Activated Film 7110B is tacky film that is laminated at room temperature. It then cures at low temperature to form a high strength bond.