Blog

3M Trizact Roloc Cloth Disc 237AA uses proprietary microreplication technology where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

3M Cubitron II Stikit Paper Sheet 732U features 3M Precision Shaped Ceramic Grain, a revolutionary advancement in abrasive technology. The triangular shaped ceramic mineral is designed to slice through the substrate, rather than gouging or “plowing” like conventional abrasives, resulting in a sheet that cuts fast and offers long life.

The 3M Resin Bond Diamond Super Abrasive Wheel 637BI is a fast, free-cutting wheel developed to grind Polycrystalline Diamond (PCD), carbide, thermal spray coatings and other hard-to-grind materials. Its unique resin bond construction is designed to reduce or eliminate wheel conditioning altogether to simplify and improve processes and promote higher throughput.

When traditional aluminum oxide belts aren’t cutting it, try 3M Cloth Belt 577F with alumina zirconia abrasive grain. It offers increased cutting efficiency compared to aluminum oxide, and has a heavy, water-resistant polyester backing that stands up to high-pressure applications and edge work.

3M Diamond Resin Wheel 634AH is a general purpose wheel designed for the production and re-sharpening of tungsten carbide-tipped saw blades. This wheel offers high material removal rates and good form retention.

3M Cubitron II Vitrified Grinding Wheels 92VC are the vitrified bonded grinding wheels containing 30% precision shaped grains with geometrically defined cutting edges for conventional precision grinding applications.

The 3M Diamond Wheel 650HJ is used to generate the flute which is the helical or straight groove in the body of the cutting tools made from tungsten carbide. This hybrid bonded wheel offers high cut rates, good form retention, and increased thermal stability during higher temperature grinding operations.

3M Diamond Resin Wheel 634AH is a general purpose wheel designed for the production and re-sharpening of tungsten carbide-tipped saw blades. This wheel offers high material removal rates and good form retention.

3M Diamond Resin Wheel 634AH is a general purpose wheel designed for the production and re-sharpening of tungsten carbide-tipped saw blades. This wheel offers high material removal rates and good form retention.

The 3M Diamond Polyimide Wheel 665PL is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best balance of form retention and the free-cut rate when used with water based lubricants.

3M Cubitron II Vitrified Grinding Wheels 92VC are the vitrified bonded grinding wheels containing 30% precision shaped grains with geometrically defined cutting edges for conventional precision grinding applications.

3M Diamond Resin Wheel 634AH is a general purpose wheel designed for the production and re-sharpening of tungsten carbide-tipped saw blades. This wheel offers high material removal rates and good form retention.