Blog

3M Trizact Cloth Belt 307EA uses proprietary microreplication technology where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a rayon backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

Scotch-Brite EXL Deburring Wheel features a hard, dense consistency that quickly deburrs, finishes, and polishes all types of metals, composites, glass and leaves a smooth, clean surface. Its conformable characteristic makes the wheel ideal for deburring stamped or laser cut parts, or for finishing after belt sanding.

The Standard Abrasives Aluminum Oxide 700 Series Unitized Wheel has a medium to hard density with increased edge durability, making it a good match for tough deburring and cleaning applications. It provides the durability need for removing punched hole burrs on stainless steel, removing heavy flashing and medium-sized pits and scratches, and cleaning off heavy scale or weld discoloration.

When traditional aluminum oxide belts aren’t cutting it, try 3M Cloth Belt 577F with alumina zirconia abrasive grain. It offers increased cutting efficiency compared to aluminum oxide, and has a heavy, water-resistant polyester backing that stands up to high-pressure applications and edge work.

The 3M Cut-Off Wheel 654BK is a general purpose cut-off wheel for carbide tool manufacturing. With a highly concentrated diamond abrasive mineral, solid construction and a steel core, it is commonly used for trimming tool blanks on carbides, high speed steels and hard metals.

The 3M Cut-Off Wheel 654BK is a general purpose cut-off wheel for carbide tool manufacturing. With a highly concentrated diamond abrasive mineral, solid construction and a steel core, it is commonly used for trimming tool blanks on carbides, high speed steels and hard metals.

The 3M Diamond Resin Wheel 634AG is a general purpose wheel designed for the production and re-sharpening of tungsten carbide tipped saw blades. This wheel offers high material removal rates and good form retention.

The 3M Diamond Wheel 695DM is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best form retention and the fastest cut rate when used with oil based lubricants.

The 3M Cut-Off Wheel 654BK is a general purpose cut-off wheel for carbide tool manufacturing. With a highly concentrated diamond abrasive mineral, solid construction and a steel core, it is commonly used for trimming tool blanks on carbides, high speed steels and hard metals.

3M Diamond Resin Wheel 674BM is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best form retention and the fastest cut rate when used with water based lubricants.

3M Cut-Off Wheel 664BL is used to trim carbide cutting tool blanks to length for the cutting tool manufacturing industry.

3M Cut-Off Wheel 675BM long life, high form retention cut-off wheel used to trim carbide cutting tool blanks to length for the cutting tool manufacturing industry. This 100 grit 1A1R wheel is offered in in the following dimension: 6 inches in diameter,0.035 inches thick, and a 1.25-inch arbor hole.