Blog

3M Vitrified Grinding Wheels 92VA are the vitrified bonded grinding wheels featuring 30% sintered corundum Grains for conventional grinding operations like centreless grinding, gear grinding, cylindrical or surface grinding.

Flutes are the helical or straight grooves in the body of the tool. This provides a pathway to permit the removal of chips, and to allow coolants to reach the cutting surface.

3M Vitrified Grinding Wheels 33VA are the vitrified bonded grinding wheels with standard white aluminium oxide grains for conventional precision grinding operations of gear and turbocharger parts.

3M Cut-Off Wheel 664BL is used to trim carbide cutting tool blanks to length for the cutting tool manufacturing industry.

Experienced operators know dressing is integral to the cuttingperformance of a grinding wheel. That’s why the 3M Dressing Stick was designed — to help operators keep their grinding wheels open and free cutting.

Standard Abrasives Surface Conditioning RC Roll offers the best initial rate of cut compared to other surface conditioning materials. It is a versatile abrasive that can deburr, clean, blend and finish. Above all, it is the best material for flat surface finishing. Jumbo rolls enable conversion by the end user for specific applications.

3M Vitrified Grinding Wheels 33VA are the vitrified bonded grinding wheels with standard white aluminium oxide grains for conventional precision grinding operations of gear and turbocharger parts.

When traditional aluminum oxide belts aren’t cutting it, try 3M Cloth Belt 577F with alumina zirconia abrasive grain. It offers increased cutting efficiency compared to aluminum oxide, and has a heavy, water-resistant polyester backing that stands up to high-pressure applications and edge work.

3M Cubitron II Vitrified Grinding Wheels 92VC are the vitrified bonded grinding wheels containing 30% precision shaped grains with geometrically defined cutting edges for conventional precision grinding applications.

3M Paper Belt 346UZ is constructed with a premium aluminum oxide mineral. It is an open coat construction for loading resistance and is coated on an F-weight paper backing to efficiently sand and finish. F-weight is one of the heaviest, most rigid paper backings available and will achieve finer finishes than cloth backed belts in the same grade.

Flutes are the helical or straight grooves in the body of the tool. This provides a pathway to permit the removal of chips, and to allow coolants to reach the cutting surface.

3M Trizact Cloth Belt 363FC utilizes an aluminum oxide mineral bonded to a YF-weight polyester cloth backing. 363FC belts are consistent “go-to first” products for a wide range of applications from heavy deburring and defect removal to intermediate finishing. These belts are available in grades from A300 to A35.