Blog

3M Cubitron II Cloth Belt 991FZ offers revolutionary performance with 3M Precision Shaped Grain on a polyester cloth backing. This high-performing belt is constructed with a closed coat and an additional anti-static treatment to further prevent loading during use on wood. It can be used in either wet or dry applications.

3M Cloth Belt 384F is a general-purpose aluminum oxide cloth-backed belt recommended for metal deburring, general metalworking, and some woodworking applications. It is optimized for use on mild steel and carbon steel, and is also effective on softer metals like aluminum, bronze and brass.

3M Trizact Cloth Belt 307EA uses proprietary microreplication technology where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a rayon backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

3M Cloth Belt 384F is a general-purpose aluminum oxide cloth-backed belt recommended for metal deburring, general metalworking, and some woodworking applications. It is optimized for use on mild steel and carbon steel, and is also effective on softer metals like aluminum, bronze and brass.

3M Cloth Belt 384F is a general-purpose aluminum oxide cloth-backed belt recommended for metal deburring, general metalworking, and some woodworking applications. It is optimized for use on mild steel and carbon steel, and is also effective on softer metals like aluminum, bronze and brass.

3M Cloth Belt 384F is a general-purpose aluminum oxide cloth-backed belt recommended for metal deburring, general metalworking, and some woodworking applications. It is optimized for use on mild steel and carbon steel, and is also effective on softer metals like aluminum, bronze and brass.

3M Trizact Cloth Belt 217EA uses proprietary microreplication technology in which micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a JE-weight rayon backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

3M Cloth Belt 384F is a general-purpose aluminum oxide cloth-backed belt recommended for metal deburring, general metalworking, and some woodworking applications. It is optimized for use on mild steel and carbon steel, and is also effective on softer metals like aluminum, bronze and brass.

3M Cloth Belt 747D is made with a blend of aluminum oxide and 3M ceramic grain and is designed for superior metal finishing on a variety of metals including nickel and stainless steel.

3M Cloth Belt 370DZ is an open coat product using a premium grade aluminum oxide mineral. The cloth backing of the belt makes it suitable for both rough sanding and final finishing on wide belt and edge sanding applications.

Standard Abrasives Aluminum Oxide HS Buff and Blend Roll is high strength material that is very tear resistant, so it is a good match for final finishing on irregularly shaped parts, because it will not break down or fray when it comes to contact with contours and extrusions. Most durable material under abusive conditions like sharp edges and deburring.  Available in Very Fine, Medium and Coarse, and for use in power tools

3M Microfinishing Film Belt 472L was designed for superfinishing and powertrain microfinishing. This belt helps achieve uniform, consistent finishes on parts where close tolerances are important.