Blog

3M Nitrile High Performance Plastic Adhesive 1099 creates assembled bonds that are proven to be strong. Drying quickly at room temperature with approximately 40 minutes of working time, this adhesive bonds well to plastics and vinyl, providing long-term adhesion with resistance to substrate plasticizer migration; it can also achieve even higher bonding properties through heat-initiated chemical reaction. 3M Nitrile High Performance Plastic Adhesive 1099 bonds to a variety of substrates, including leather and most vinyl sheeting, as well as plastics for a strong, enduring ahesion. These properties make it ideal for aftermarket automotive repair, including panel installation and upholstery; banners and awnings; and both general industrial and MRO applications.

3M invented 3M Super 77 Multipurpose Spray Adhesive to be an extremely versatile, fast-drying spray adhesive that bonds a wide range of lightweight materials. The permanent bond provides fast results to keep projects moving ahead. The photo-safe spray formula is easy to dispense and apply directly onto surfaces and materials where needed, with no soak-in or yellowing over time.

3M Fastbond Insulation Adhesive 49 is a fast-drying adhesive that bonds a range fabrics and insulation materials to a variety of substrates. This adhesive’s aggressive tack, high initial grab, and permanent bond provides fast results to keep projects moving ahead, while its easy-to-dispense formula enables direct application onto surfaces and materials where needed, with no soak-in thanks to its high solids content. 3M Fastbond Insulation Adhesive 49 is a long-time member of 3M’s portfolio of go-to adhesives — find out why other industry professionals are choosing it for their project needs.

3M Fastbond Spray Activator 1 is used to enhance the bonding capabilities and handling strength without forced drying equipment for most applications. It is designed to specifically work with water based 3M Fastbond 2000NF Adhesive, 3M Fastbond Contact Adhesive 30NF and 3M Fastbond Foam Adhesive 100NF.

3M Fastbond Foam Adhesive 100NF is designed for optimal versatility, delivering permament bonds on a wide range of lightweight materials. This adhesive has a medium tack and a high solids content that supports its low soak-in property. When sprayed, this formula has a pebble pattern, is non-flammable in its wet state, and is easy to dispense; when not being sprayed, it can be applied directly by using a brush or roller. A staple in the 3M adhesive portfolio, discover why 3M Fastbond Foam Adhesive 100NF is recognized worldwide for its reliability when bonding foam to plastic, metal, wood, and much more.

3M Neoprene High Performance Rubber and Gasket Adhesive 1300L is a versatile, solvent based adhesive. It offers high immediate strength and good heat resistance, and is commonly used for bonding most rubber and gasket materials. It is also suitable for large area rubber sheeting applications, bumpers and more.

3M Neoprene High Performance Contact Adhesive 1357 is a versatile, solvent-based adhesive that offers fast handling strength, water resistance, and high-temperature performance up to 250 °F (121 °C). While commonly used for bonding most metals and plastics, it is also suitable for large surface panels or composite lamination. This adhesive dries quickly while allowing time for positioning and adjustments, making it ideal for applications involving materials such as metal honeycomb composite, stainless steel, and wood panels.

3M Nitrile Industrial Adhesive 4491 is a sprayable, fast-drying adhesive that provides strong, flexible bonds with excellent environmental resistance. 3M also formulated this spray adhesive to offer good resistance to plasticizer migration. In addition, the 3M Nitrile Industrial Adhesive 4491 has the ability to be heat cured to obtain superior physical properties.

3M Neoprene High Performance Rubber and Gasket Adhesive 1300 is a versatile, solvent-based adhesive that offers high immediate handling strength, water resistance, and high-temperature performance up to 250 °F (121 °C). While commonly used for bonding most rubber and gasket materials, such as neoprene, SBR, and butyl rubbers, it is also suitable for large-area rubber sheeting applications. With a bonding range of 8-12 minutes, this adhesive dries quickly while allowing time for positioning and adjustments, making it ideal for applications such as general MRO, bonding rubber gaskets to metal surfaces, general purpose bonding applications (should not be applied to EPDM or TPO), attaching rubber to various substrates, and repairing rubber.

3M Plastic Adhesive 2262 dries quickly with an open time of approximately 20 minutes. Its assembled bonds are proven to be strong while resisting weathering as well as damage from water and the sun. Additionally, it bonds well to plastics and vinyl, providing long-term adhesion as well as good resistance to plasticizer migration.

3M Foam Fast 74 CA Orange Spray Adhesive – Low VOC <25% is a fast-drying spray adhesive that bonds foam and fabric to a wide range of substrates. The permanent bond provides fast results to keep projects moving ahead, with a non-yellowing formula that dispenses easily in a lace-spray pattern and applies directly onto surfaces and materials where needed.

3M Neoprene High Performance Contact Adhesive 1357 is a versatile, solvent-based adhesive that offers fast handling strength, water resistance, and high-temperature performance up to 250 °F (121 °C). While commonly used for bonding most metals and plastics, it is also suitable for large surface panels or composite lamination. This adhesive dries quickly while allowing time for positioning and adjustments, making it ideal for applications involving materials such as metal honeycomb composite, stainless steel, and wood panels.