Blog

3M Diamond Lapping Film 663X has a stronger resin system that gives this product added toughness and longer life. Used primarily in superfinishing, roll polishing, and flat lapping applications. Available in 30.0, 45.0, and 60.0 micron grades.

3M Diamond Lapping Film 663X has a stronger resin system that gives this product added toughness and longer life. Used primarily in superfinishing, roll polishing, and flat lapping applications. Available in 30.0, 45.0, and 60.0 micron grades.

3M Thermally Conductive Silicone Interface Pad 5584 is a soft, silicone elastomer with thermal conductivity of 1.1 W/m-K. Conformable at low pressure to minimize stress on components and fill gaps. Good dielectric properties.

3M Thermally Conductive Silicone Interface Pad 5584 is a soft, silicone elastomer with thermal conductivity of 1.1 W/m-K. Conformable at low pressure to minimize stress on components and fill gaps. Good dielectric properties.

3M Thermally Conductive Silicone Interface Pad 5584 is a soft, silicone elastomer with thermal conductivity of 1.1 W/m-K. Conformable at low pressure to minimize stress on components and fill gaps. Good dielectric properties.

A silica mineral coated on a 3 mil backing for the final step in polishing fiber optic ceramic connectors. Standard life product works on many different brands of polishing machines.

3M Diamond Lapping Film 662XW has a higher diamond concentration and a stronger resin bond to give this product added durability and increased cut rate over the standard diamond lapping film. Available in 0.50, 1.0, 1.50, 3.0, 6.0 and 9.0 micron grades.

Precisely graded diamond particles coated on a polyester film. Provides a consistent, repeatable finish on extremely hard materials. Available in several grades between 0.10 and 30.0 micron.

3M Embedded Capacitance Material (ECM) is laminate of copper and epoxy with a high dielectric constant filler material intended as a layer in a printed circuit board, flex circuit, or rigid-flex circuit

3M Static Dissipative Heat Activated Cover Tape 2675 is a transparent, two sided static dissipative polyester film tape with a heat activated adhesive.

ISOLOSS LS materials are fine-celled, low compression-set, high density polyurethane foams, offering unique combinations of design features for difficult mechanical energy control problems. ISOLOSS LS products exhibit very low compression set and excellent resistance to collapse as well as good shock absorption and vibration isolation performance. They also feature low outgassing and good dimensional stability. ISOLOSS LS foams provide excellent shock control and cushioning, yet are durable enough for gasketing, padding and sealing applications.

3M Polishing Film 491X with plain back is comprised of micron graded mineral that has been coated onto a fibrous (flocked) polyester film backing. Designed to break down into a slurry during use with water.