Blog

3M Stikit Green Corps Abrasive Disc 246U shapes plastic filler, removes paint around damaged areas and refines scratches on bare metal. Green Corps abrasives are built on D weight backing to make them extremely durable for sanding paint, metal, or fiberglass. Ceramic aluminum oxide mineral blend delivers a fast cut and long life.

The 3M Cubitron II Abrasive Belt 947A built with 3M Precision-Shaped Grain cuts metal dramatically faster and cooler, and stays sharp longer than conventional ceramic belts. Its X-weight poly-cotton backing is flexible. This belt is optimized for low and medium pressure applications on stainless steel, mild steels, and aluminum.

3M Cloth Belt 341D is a durable aluminum oxide cloth belt recommended for your metal deburring, general metalworking, and some woodworking applications. It is suitable for wide belt, edge, or portable belt sanding, and can be used for a variety of applications on metal substrates and wood.

3M Cloth Belt 340D is an open coat premium grade aluminum oxide cloth belt that provides durability for aggressive stock removal, resists loading, and is suitable for a variety of applications on wood and metal. This belt is recommended for wide belt sanding, edge sanding, or portable belt sanding.

Designed for the pro, the 3M Multi-Purpose Quick Latch Reusable Respirator 65023QL helps give you convenience and protection on the job. Equipped with the proprietary Quick Latch system, this reusable respirator is easy to take on and off in non-contaminated areas, and there’s no need to take off your hard hat or adjust straps as you’re raising and lowering your respirator. When you’re outside the hazardous area, this respirator lets you take a quick break or have a conversation with a simple flip of the lever. When you’re on the job, you need versatility, comfort and protection—so reach for the 3M Multi-Purpose Quick Latch Reusable Respirator 65023QL and get to work.

Series 270 can be applied early and late season, down to 40°F (4°C), with use of 3M Stamark Surface Preparation Adhesive P-50 or 3M Stamark Low VOC Surface Preparation Adhesive SPA60

3M Blue Sandpaper 31580-8, 3 2/3 in X 9 in, 600 G, 8 Sheet/Pack, 20 Pack/Case

3M Blue Sandpaper 31577-8, 3 2/3 in X 9 in, 180 G, 8 Sheet/Pack, 20 Pack/Case

3M Vinyl Foam Tape 4516 includes a closed cell, high-density, flexible foam backing with a pressure-sensitive acrylic adhesive on one side. It allows for quick-stick to a variety of substrates including many metals, glass and plastics. The silicone treated white paper liner helps to minimize stretching during installation.

Scotch-Brite Metal Finishing Wheel combines conformability with consistent abrasive cutting action to provide uniform brushed stainless and satin finishes. The Metal Finishing Wheel is also used effectively to blend and match #3 or #4 mill finishes on stainless steel and to create brushed or satin finishes on items such as cutlery, appliance trim, builders hardware, and plumbing fixtures.

3M Trizact Cloth Belt 307EA uses proprietary microreplication technology where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a rayon backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

Take advantage of increased durability and cutting efficiency with 3M Cloth Belt 777F. This belt features a blend of 3M Ceramic Abrasive Grain and aluminum oxide that outperforms aluminum oxide belts in stock removal and metal finishing applications. The heavyweight cloth backing supports high-pressure applications, performs well on heat-sensitive metals, and can be used dry or with lubricant.