Blog

3M Uncoated Cloth Belt is an uncoated, nonabrasive belt construction. Belts are available in a variety of widths, lengths and backing weights. These belts are typically used for polishing with an applied compound or cleaning applications in which non-abrasive techniques are required.

Scotch-Brite SC Surface Conditioning Belt is a durable belt engineered to perform detail work such as blending, blending corners, cleaning, contour finishing, deburring, deburring edges, fine finishing, flat finishing, setting the grain, stainless steel finishing, and attaining straightline-brushed finishes on a variety of metals.

The Standard Abrasives Surface Conditioning RC Belt saves time preparing workpieces for final finishes and coatings by performing one-step prep work. Constructed with enhanced edge durability and flexibility, combined with high initial and extended cut rate, this is a great all-around belt for deburring, blending, cleaning and finishing on composites and softer metals.

Scotch-Brite Light Coating Removal Disc removes light, unwanted coatings from your substrate. Be it paint, rust, sealant or varnish, the unique properties of Scotch-Brite non-woven technology, like load resistance, make this abrasive a good match for these projects. The abrasive is designed to fight dust and debris, so you can remove coatings and get consistent results, part after part.

Scotch-Brite Star was designed for blending, deburring and finishing hard-to-reach internal diameters, including metal tubing and piping.

The Standard Abrasives Surface Conditioning FE Belt saves time preparing workpieces for final finishes and coatings by performing one-step prep work. A reliable choice for edgework, some of its best uses include deburring and blending. FE material is an outstanding performer for flats and edgework when high contact pressure and stock removal are required.

The 3M Finesse-it Hand Sanding Pad is crafted from durable rubber and designed to hold 3M Finesse-it sanding or finishing discs with pressure sensitive adhesive. The sanding pads are available in three different sizes to accommodate 1-1/4″ or 1-3/8″ discs.

The Standard Abrasives Surface Conditioning RC Belt saves time preparing workpieces for final finishes and coatings by performing one-step prep work. Constructed with enhanced edge durability and flexibility, combined with high initial and extended cut rate, this is a great all-around belt for deburring, blending, cleaning and finishing on composites and softer metals.

The 3M Finesse-it Hand Sanding Pad is crafted from durable rubber and designed to hold 3M Finesse-it sanding or finishing discs with pressure sensitive adhesive. The sanding pads are available in three different sizes to accommodate 1-1/4″ or 1-3/8″ discs.

Scotch-Brite Edger Disc Pads support 3M Edger Sanding Screens or Discs creating a flexible sanding system. Adapts to contoured surfaces. Smooths out swirl or gouge marks. Durable nylon and polyester fibers. Reusable. Clean by shaking or rinsing.

The Standard Abrasives Silicon Carbide 700 Series Unitized Wheel has a medium to hard density with increased edge durability, making it a good match for tough finishing applications. This non-woven abrasive wheel provides the durability needed for achieving a fine finish even on hard metals such as titanium.

These 3M Hookit blocks combine the lightweight flexibility of traditional foam blocks with the dust extraction power and control of rigid dust-free sanding blocks. They feature a convex face which can help you easily restore contours and bodylines, while still providing a firm backing for abrasives. They include a vacuum regulator that lets the operator adjust suction for easier block control when sanding.