Blog

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ Temflex™ Cotton Friction Tape 1755 is a black friction tape designed to provide mechanical protection against abrasion and cut through for cable, wire splices and connections insulated with rubber electrical tape.

For Industrial Use Only. Estimated Lead Time Is 2 Working Days.

Brimless, lightweight clear polycarbonate visor helps provide high impact face protection. Must be used with hard hat. Faceshield snaps into 3M™ Peltor™ Hard Hat Adapter P3EV/2 or 3M™ Peltor™ Cap-Mounted Earmuffs.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ PPS™ Type H/O Pressure Cup is a pressurized (H/O) hard cup and collar set that supports and holds 3M™ PPS™ flexible liner used in the 3M™ PPS™ (Legacy) paint preparation system. This product is intended for use in place of metal cups on most pressure spray guns. Available sizes include Mini – 6 oz. and Large – 28 oz. cups.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ PPS™ Lid & Liner Kits each contain 50 disposable lids with welded-in filters to strain paint material while spraying, along with 50 liners and 20 sealing plugs for use with the 3M™ Paint Preparation System. Kits are available in five sizes for a range of jobs large and small.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ PPS™ Mix Ratio Inserts help mix paint according to manufacturer guidelines for the 3M™ PPS™ (Legacy) paint preparation system. Mix ratio inserts are available for various cup sizes and manufacturers.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ Surface Protection Material Floor Applicators hold material rolls securely and roll smoothly as material is applied.

For Industrial Use Only. Estimated Lead Time Is 50 Working Days.

3M™ Surface Protection Material Wall Applicator is designed to effortlessly apply any 28 inch wide 3M™ Surface Protection Material to vertical surfaces. The wall applicator holds material rolls securely and rolls smoothly as material is being applied.

For Industrial Use Only. Estimated Lead Time Is 10 Working Days.

3M™ Accuspray™ Atomizing Heads are designed specifically for use with 3M™ Accuspray™ ONE Spray Guns. This selection of replaceable heads makes for the incredibly fast, efficient application of low-, medium- and high-viscosity materials from one gun. Technicians simply remove and replace the head for the performance of a new spray gun on demand. See-through heads are easily cleaned and reused. For use with the 3M™ Spray Gun Model HG14.

The 3M Stikit Sanding Block makes everyday sanding jobs easier. Comfortable to grip, it distributes pressure evenly. Sharpen corners with the flat edge, sand contours with the rounded end. 3M Stikit abrasives adhere to the backup pad, feeds from a roll and shears off when used.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

The 3M™ Stikit™ Sanding Block makes everyday sanding jobs easier. Comfortable to grip, it distributes pressure evenly. Sharpen corners with the flat edge, sand contours with the rounded end. 3M™ Stikit™ abrasives adhere to the backup pad, feeds from a roll and shears off when used.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ Square/Cross Pad Mandrel secures a square pad, a cross pad, or a cross buff to a rotary tool with a 1/4-inch collet assembly.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ Hookit™ Disc Hand Pads provide improved operator comfort and increased surface uniformity when hand sanding.  These foam backup pads utilize a Hookit™ attachment style.