Blog

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ PPS™ Lid & Liner Kit 16028 contains 50 lids with 200 micron filters, 50 liners, and 20 sealing plugs. For use with part number 16115 or 16121 (H/O pressure cup).

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ W Series Faceshields & Visors help provide protection in environments that may involve exposure to impact or splash hazards and flying debris. Knowing that every minute counts on the job, these face protectors deliver simple usability without sacrificing safety.

For Industrial Use Only.  Estimated Lead Time Is 2 Working Days.

3M™ BX™ Protective Eyewear comes with an adjustable temple length, lens angle, and nose bridge to allow a more comfortable fit. The ability to customize the safety glasses to the wearer makes them more pleasant to use over extended time periods. The nose bridge is cushioned for softness and comfort. The impact-resistant polycarbonate lenses absorb 99.9% UV rays.

For Industrial Use Only. Estimated Lead Time On This MAKE TO ORDER ITEM Is 3 Working Days.

A 3M flat wet mop measuring 1.3 inch diameter at it’s broadest width and weighing only 1 lb. 3 oz. (without fluid), this commercial mop is ideal for tight spaces such as under toilets, beds and vending machines

Cap-mounted headgear assembly can be used with any 3M™ Faceshield to help provide face protection. Designed to fit most hard hat accessory slots. High-strength thermoplastic crown provides impact resistance.

For Industrial Use Only. Estimated Lead Time Is 10 Working Days.

3M™ Multi Gas/Vapor Cartridge 6006 is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors, chlorine, hydrogen chloride, chlorine dioxide, sulfur dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde or hydrogen fluoride.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

This disposable P95 particulate respirator features 3M proprietary advanced electret filter media, foam faceseal and 3M™ Cool Flow™ Valve to help provide comfortable worker respiratory protection against certain oil and non oil based particles.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ Organic Vapor Cartridge 6001 has a bayonet-style connection that fits any full-face 3M™ Reusable Masks, and it is designed to optimize your field of vision.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ Organic Vapor/Acid Gas Cartridge 6003 helps provide respiratory protection against certain organic vapors or acid gases. Use with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with a bayonet-style filter/cartridge connection or 3M™ Scott™ AV-3000 HT and AV-3000 Sure-Seal facepieces with 3M™ Scott™ AV-632 Bayonet Adapter.

For Industrial Use Only.

Estimated Lead Time On This Non-Returnable MAKE TO ORDER Item Is 11 Working Days.

3M™ Speedglas™ Welding Helmet Outside Protection Plate 9100, 06-0200-53, High Temperature

The Speedglas 9100 high temperature outside protection plate is formulated from an engineered resin to resist higher heat applications. This is recommended for use in high amperage welding or conditions where long weld beads may generate radiant heat.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

The 3M™ Particulate Filter 2091, P100 helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. 3M’s Advanced Electret Media (AEM) provides a comfortable lightweight, easy-breathing combination.

For Industrial Use Only. Estimated Lead Time For This Non-Returnable MAKE TO ORDER Item Is 5 Working Days.

Each kit includes one 3M™ Doodlebug™ Pad Holder 6472, White Cleaning Pad 8440 and 3M™ Doodlebug™ Brown Scrub ‘n Strip Pad 8541.