Blog

3M Precision Masking Tape is excellent for critical edge paint performance, helping auto body painters produce sharp paint lines using solvent and waterborne paint systems. Its ultra thin paper backing helps produce very low paint edges, yet it’s strong enough to pull through layers of color and clear coat. The tape is ideal for two-tone separation, bumper black out areas and back masking.

3M Heat Shrink Cable Sleeve MDT is a flexible, medium wall tubing that provides abrasion, corrosion and chemical resistance. This sleeve has a 3:1 shrink ratio that offers primary electrical insulation for 1 kV rated applications. The flame retardant polyolefin construction features a thermoplastic sealant to provide moisture seal protection.

3M Heat Shrink Cable Sleeve HDT is a flexible, heavy wall tubing that provides abrasion, corrosion and chemical resistance. This sleeve has a 3:1 shrink ratio and offers primary electrical insulation for 1 kV rated applications. The flame retardant polyolefin construction features a thermoplastic sealant that provides moisture seal protection.

3M Heat Shrink Cable Sleeve MDT is a flexible, medium wall tubing that provides abrasion, corrosion and chemical resistance. This sleeve has a 3:1 shrink ratio that offers primary electrical insulation for 1 kV rated applications. The flame retardant polyolefin construction features a thermoplastic sealant to provide moisture seal protection.

3M Heat Shrink Cable Sleeve MDT is a flexible, medium wall tubing that provides abrasion, corrosion and chemical resistance. This sleeve has a 3:1 shrink ratio that offers primary electrical insulation for 1 kV rated applications. The flame retardant polyolefin construction features a thermoplastic sealant to provide moisture seal protection.

3M Heat Shrink Cable Sleeve HDT is a flexible, heavy wall tubing that provides abrasion, corrosion and chemical resistance. This sleeve has a 3:1 shrink ratio and offers primary electrical insulation for 1 kV rated applications. The flame retardant polyolefin construction features a thermoplastic sealant that provides moisture seal protection.

When sealing ducts and other surfaces for heating, ventilation and air conditioning systems (HVAC), it’s essential to have a strong, long-lasting foil tape that can stand up well to hot and cold temperatures. The 3M Foil Tape 3340 has the combination of 2.0 mil aluminum foil backing and strong, pressure sensitive acrylic adhesive that gives the tape a superb operational temperature range of -40°F (-40°C) to 300°F (149°C) making it ideal for sealing rigid fiberglass duct boards and flexible air duct systems. The foil backing also serves as an excellent barrier against moisture, dust and many chemicals — making it strong, durable and long-lasting.

The very low moisture vapor transmission rate makes the tape a good sealant and the acrylic adhesive supplies superior temperature and UV resistance to give you a strong, lasting and reliable bond. It also has an easy releasing poly coated kraft paper liner to protect the adhesive and keep the tape ready for use. 3340 tape meets requirements for UL 181 A-P and UL 181 B-FX Listings as a measure of reliability and quality standards.

3M Foil Tape 3340 is used in a variety of applications including heating ventilation air conditioning (HVAC), duct closure, vapor seal on reinforced fiberglass duct board, rigid fiber glass duct board, and flexible air ducts and air connectors across a number of industries, including: transportation, specialty vehicle, metalworking, construction, automotive, military and government, general industrial, MRO, electronics and aerospace.

The 3M Dynamic Mixing System Nozzle is integral to fast, accurate mixing of two-part body repair products. Nozzles are specially designed for low-waste mixing that thoroughly blends material to specific ratios. Choose the DMS 1.0 red nozzle for fillers and glazes, and purple nozzles for DMS 1.5 adhesives and sealers. Nozzle extensions are available for adhesives and sealants to reduce bead size.

The 3M Dynamic Mixing System Nozzle is integral to fast, accurate mixing of two-part body repair products. Nozzles are specially designed for low-waste mixing that thoroughly blends material to specific ratios. Choose the DMS 1.0 red nozzle for fillers and glazes, and purple nozzles for DMS 1.5 adhesives and sealers. Nozzle extensions are available for adhesives and sealants to reduce bead size.

The 3M Dynamic Mixing System Nozzle is integral to fast, accurate mixing of two-part body repair products. Nozzles are specially designed for low-waste mixing that thoroughly blends material to specific ratios. Choose the DMS 1.0 red nozzle for fillers and glazes, and purple nozzles for DMS 1.5 adhesives and sealers. Nozzle extensions are available for adhesives and sealants to reduce bead size.

The Scotch-Brite Clean and Strip Disc D1 is well suited for cleaning operations requiring an aggressive cut to remove paint, sealant, rust or other coatings. The disc has a built-in 1/4˝ spindle for easy attachment to a die grinder or other portable tool.

3M Pneumatic Applicator 34A is a high-quality applicator engineered for dispensing cartridges in high volume applications. Pneumatic propulsion takes the squeezing out of dispensing adhesives and sealants, making light work of large surface area projects. Featuring variable flow control, the applicator gives you the ability to dispense the precise amount of product each task calls for. Built with a durable, 3-piece telescoping piston, the 3M Pneumatic Applicator 34A is ready to produce optimal results for many projects to come.