Blog

Used to calibrate the carbon monoxide (CO) monitors in the 3M Portable Compressed Air Filter and Regulator Panel 256-02-00, 256-02-01 and 3M Retrofit CO Monitor Kit W-2808. Contains a 0.6 cubic foot cylinder of zero gas, a 0.6 cubic foot cylinder of span gas, cylinder valve and case.

For Industrial Use Only. This Is A MAKE TO ORDER Item.

3M™ Calibration Kit 529-04-48 is used to calibrate certain carbon monoxide (CO) monitors.

Six head harness buttons for use on the 3M Ultimate FX Full Facepiece Reusable Respirators FF-401, 402 and 403.

Six head harness buckles for use on the 3M Ultimate FX Full Facepiece Reusable Respirators FF-401, 402 and 403.

3M™ Breathing Tube W-5115/37313, 1 ea/Bag

3M™ Breathing Tube W-5115/37313 connects the air source with the head top and ensures clean air reaches the head top reliably and with unrestricted airflow. Sold by JAM Industrial Supply, a Premier 3M Distributor.

3M™ Breathing Tube W-5114/07031(AAD), 1 EA/Case

3M™ Breathing Tube W-5114/07031(AAD) connects the air source with the head top and ensures clean air reaches the head top reliably and with unrestricted airflow. Sold by JAM Industrial Supply, a Premier 3M Distributor.

3M Powered & Supplied Air Breathing Tubes are part of a NIOSH-approved respiratory system

3M Powered & Supplied Air Breathing Tubes are part of a NIOSH-approved respiratory system

This assembly, 36 inches in length, is used with the 3M Breathe Easy 10 System. It delivers air to a butyl rubber hood used on the system.

3M Performance Pressure HVLP Atomizing Heads are designed to deliver excellent spray performance for coatings including stains, primers, base coats, topcoats, clear coats and adhesives. Replaceable nozzles are built exclusively for pressure-feed applications using the 3M Performance Spray Gun, offering like-new spray performance with the change of each nozzle.

3M Performance Pressure HVLP Atomizing Heads are designed to deliver excellent spray performance for coatings including stains, primers, base coats, topcoats, clear coats and adhesives. Replaceable nozzles are built exclusively for pressure-feed applications using the 3M Performance Spray Gun, offering like-new spray performance with the change of each nozzle.

3M Accuspray Atomizing Heads are designed specifically for use with 3M Accuspray ONE Spray Guns. This selection of replaceable heads makes for the incredibly fast, efficient application of low-, medium- and high-viscosity materials from one gun. Technicians simply remove and replace the head for the performance of a new spray gun on demand. See-through heads are easily cleaned and reused.