Blog

3M Diamond Wheel 686HN is a special hybrid bond diamond wheel used for grinding primary and secondary relief angles on round tools made of tungsten carbide. This highly engineered wheel offers the excellent form retention and long wheel life which is ideal for long production runs where tighter control on tolerances are required.

Fast and free-cutting, the 3M Cut-Off Wheel 654BJ is used to trim carbide cutting tool blanks to length for the cutting tool manufacturing industry. This 1A1R wheel is offered in offered in 100 and 220 grit in the following dimension: 6 inches in diameter,0.035 inches thick, and a 1.25-inch arbor hole.

Fast and free-cutting, the 3M Cut-Off Wheel 654BJ is used to trim carbide cutting tool blanks to length for the cutting tool manufacturing industry. This 1A1R wheel is offered in offered in 100 and 220 grit in the following dimension: 6 inches in diameter,0.035 inches thick, and a 1.25-inch arbor hole.

3M Cut-Off Wheel 664BL is used to trim carbide cutting tool blanks to length for the cutting tool manufacturing industry.

3M Cut-Off Wheel 664BL is used to trim carbide cutting tool blanks to length for the cutting tool manufacturing industry.

3M Trizact Cloth Belt 363FC utilizes an aluminum oxide mineral bonded to a YF-weight polyester cloth backing. 363FC belts are consistent “go-to first” products for a wide range of applications from heavy deburring and defect removal to intermediate finishing. These belts are available in grades from A300 to A35.

3M Trizact Cloth Belt 363FC utilizes an aluminum oxide mineral bonded to a YF-weight polyester cloth backing. 363FC belts are consistent “go-to first” products for a wide range of applications from heavy deburring and defect removal to intermediate finishing. These belts are available in grades from A300 to A35.

When traditional aluminum oxide belts aren’t cutting it, try 3M Cloth Belt 577F with alumina zirconia abrasive grain. It offers increased cutting efficiency compared to aluminum oxide, and has a heavy, water-resistant polyester backing that stands up to high-pressure applications and edge work.

When traditional aluminum oxide belts aren’t cutting it, try 3M Cloth Belt 577F with alumina zirconia abrasive grain. It offers increased cutting efficiency compared to aluminum oxide, and has a heavy, water-resistant polyester backing that stands up to high-pressure applications and edge work.

3M Cloth Belt 302D is an aluminum oxide belt with open coat construction and a flexible J-weight backing that conforms well for sanding contours and complex parts. It is best-suited for light grinding, finishing, deburring and setting the grain on carbon steel and stainless steel, as well as soft metals like aluminum, brass, bronze and copper.

3M Cloth Belt 302D is an aluminum oxide belt with open coat construction and a flexible J-weight backing that conforms well for sanding contours and complex parts. It is best-suited for light grinding, finishing, deburring and setting the grain on carbon steel and stainless steel, as well as soft metals like aluminum, brass, bronze and copper.

The 3M Diamond Polyimide Wheel 665PL is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best balance of form retention and the free-cut rate when used with water based lubricants.