Blog

3M Diamond Resin Wheel 664BK is used for high performance grinding of carbide cutting tools. It has superior form retention and runs with water-based coolant. From 100 to 400 mesh grits and dual grit – (120/320).

3M Cut-Off Wheel 664BL is used to trim carbide cutting tool blanks to length for the cutting tool manufacturing industry.

The 3M Diamond Resin Wheel 663BK is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best form retention and the fastest cut rate when used with water based lubricants.

3M Wetordry Paper Disc 431Q features extra-fast cutting silicon carbide on a strong, waterproof paper backing that gives you superior finishing for both wet and dry applications on a variety of substrates.

3M Cut-Off Wheel 664BL is used to trim carbide cutting tool blanks to length for the cutting tool manufacturing industry.

3M Cut-Off Wheel 664BL is used to trim carbide cutting tool blanks to length for the cutting tool manufacturing industry.

3M Paper Belt 466UZ is a smooth running belt constructed with silicon carbide mineral, bonded to an F-weight paper backing. The semi-closed coat construction efficiently sands and finishes flat surfaces in woodworking applications. F-weight is one of the heaviest, most durable paper backings available and will achieve finer finishes than cloth backed belts in the same grade.

When traditional aluminum oxide belts aren’t cutting it, try 3M Cloth Belt 577F with alumina zirconia abrasive grain. It offers increased cutting efficiency compared to aluminum oxide, and has a heavy, water-resistant polyester backing that stands up to high-pressure applications and edge work.

3M Cut-Off Wheel 664BL is used to trim carbide cutting tool blanks to length for the cutting tool manufacturing industry.

The 3M Cut-Off Wheel 654BK is a general purpose cut-off wheel for carbide tool manufacturing. With a highly concentrated diamond abrasive mineral, solid construction and a steel core, it is commonly used for trimming tool blanks on carbides, high speed steels and hard metals.

3M Diamond Resin Wheel 664BK is used for high performance grinding of carbide cutting tools. It has superior form retention and runs with water-based coolant. From 100 to 400 mesh grits and dual grit – (120/320).

3M Cloth Belt 302D is an aluminum oxide belt with open coat construction and a flexible J-weight backing that conforms well for sanding contours and complex parts. It is best-suited for light grinding, finishing, deburring and setting the grain on carbon steel and stainless steel, as well as soft metals like aluminum, brass, bronze and copper.