Blog

Fast and free-cutting, the 3M Cut-Off Wheel 654BJ is used to trim carbide cutting tool blanks to length for the cutting tool manufacturing industry. This 1A1R wheel is offered in offered in 100 and 220 grit in the following dimension: 6 inches in diameter,0.035 inches thick, and a 1.25-inch arbor hole.

The 3M Diamond Wheel 695DM is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best form retention and the fastest cut rate when used with oil based lubricants.

3M Cloth Belt 384F is a general-purpose aluminum oxide cloth-backed belt recommended for metal deburring, general metalworking, and some woodworking applications. It is optimized for use on mild steel and carbon steel, and is also effective on softer metals like aluminum, bronze and brass.

When traditional aluminum oxide belts aren’t cutting it, try 3M Cloth Belt 577F with alumina zirconia abrasive grain. It offers increased cutting efficiency compared to aluminum oxide, and has a heavy, water-resistant polyester backing that stands up to high-pressure applications and edge work.

3M Trizact Cloth Belt 307EA uses proprietary microreplication technology where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a rayon backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

3M Cloth Belt 384F is a general-purpose aluminum oxide cloth-backed belt recommended for metal deburring, general metalworking, and some woodworking applications. It is optimized for use on mild steel and carbon steel, and is also effective on softer metals like aluminum, bronze and brass.

3M Trizact Cloth Belt 237AA uses proprietary microreplication technology by 3M where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

3M Trizact CF Cloth Belt 347FC features a unique formulation and “bricks and channels” abrasive design well suited for hard chrome grinding and finishing. The 347FC belt delivers consistent grinding performance without loading and dulling and the flexible X-weight cloth backing withstands high pressure grinding on hard metals.

3M Trizact CF Cloth Belt 347FC features a unique formulation and “bricks and channels” abrasive design well suited for hard chrome grinding and finishing. The 347FC belt delivers consistent grinding performance without loading and dulling and the flexible X-weight cloth backing withstands high pressure grinding on hard metals.

Take advantage of increased durability and cutting efficiency with 3M Cloth Belt 777F. This belt features a blend of 3M Ceramic Abrasive Grain and aluminum oxide that outperforms aluminum oxide belts in stock removal and metal finishing applications. The heavyweight cloth backing supports high-pressure applications, performs well on heat-sensitive metals, and can be used dry or with lubricant.

3M Cubitron II Cloth Belt 991FZ offers revolutionary performance with 3M Precision Shaped Grain on a polyester cloth backing. This high-performing belt is constructed with a closed coat and an additional anti-static treatment to further prevent loading during use on wood. It can be used in either wet or dry applications.

3M Cloth Belt 384F is a general-purpose aluminum oxide cloth-backed belt recommended for metal deburring, general metalworking, and some woodworking applications. It is optimized for use on mild steel and carbon steel, and is also effective on softer metals like aluminum, bronze and brass.