Blog

3M Stikit Gold Film Roll 255L features aluminum oxide abrasive grain on a film backing for a fast cut-rate and uniform, close-tolerance finish on wood, paint prep, and defect repair applications. The flexible film backing provides a consistent finish and greater tear-resistance than a comparable paper product, making it well-suited for a high-production environment.

When traditional aluminum oxide belts aren’t cutting it, try 3M Cloth Belt 577F with alumina zirconia abrasive grain. It offers increased cutting efficiency compared to aluminum oxide, and has a heavy, water-resistant polyester backing that stands up to high-pressure applications and edge work.

3M Resin CBN Grinding Wheel 1PBB is the series of peripheral grinding wheels featuring phenolic resin bond and a CBN grit system, which is suitable for use with oil and emulsion lubricants.

3M Trizact Cloth Belt 217EA uses proprietary microreplication technology in which micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a JE-weight rayon backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

3M Cubitron II Cloth Belt 966F is designed to provide efficient surface finishing on a variety of metals including stainless steel, titanium and other high nickel alloys. Made with 3M precision shaped ceramic grain attached to a water resistant polyester cloth backing, this belt can aggressively sand and finish surface without discoloring the metal in either wet or dry applications.

When traditional aluminum oxide belts aren’t cutting it, try 3M Cloth Belt 577F with alumina zirconia abrasive grain. It offers increased cutting efficiency compared to aluminum oxide, and has a heavy, water-resistant polyester backing that stands up to high-pressure applications and edge work.

3M Cloth Belt 340D is an open coat premium grade aluminum oxide cloth belt that provides durability for aggressive stock removal, resists loading, and is suitable for a variety of applications on wood and metal. This belt is recommended for wide belt sanding, edge sanding, or portable belt sanding.

3M Cloth Belt 747D is made with a blend of aluminum oxide and 3M ceramic grain and is designed for superior metal finishing on a variety of metals including nickel and stainless steel.

Operators convert the Scotch-Brite Cut and Polish Unitized Block into custom sizes and shapes for their unique applications. This tightly layered, durable, unitized abrasive block is available in fine and medium densities, and works well for aggressive deburring, blending and finishing on harder metals.

3M Trizact Cloth Belt 237AA uses proprietary microreplication technology by 3M where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

3M Trizact Cloth Belt 305EA features an aluminum oxide mineral constructed on a very flexible JE-weight backing. It is resin bonded for heat resistance and contains a grinding aid to assist in cutting and keeping the work piece cool. This belt offers outstanding consistency and long belt life in both robotic and offhand applications. It is available in micron grades A5 and A3.

3M Cloth Cone 777F reaches into corners, inside surfaces and tight spaces to refine welds, remove machine tool marks, and polish. Built with 3M Ceramic Abrasive Grain on a water resistant polyester cloth backing, it can be run wet or dry. A resin bond is heat resistant and a grinding aid helps to run cool, especially on heat sensitive metals like stainless steel and nickel alloys.