Blog

3M Diamond Wheel 665PK is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best balance of form retention and wheel life at average cut rates.

Scotch-Brite Clean and Finish Roll delivers consistent results for finishing, blending, polishing, and cleaning on a variety of metals, wood, plastics surfaces as well as hard-to-reach areas. The roll stock can be easily cut to any length. Clean and Finish roll stock provides consistent surface conditioning for the life of the product.

3M Diamond Resin Wheel 634AH is a general purpose wheel designed for the production and re-sharpening of tungsten carbide-tipped saw blades. This wheel offers high material removal rates and good form retention.

3M Trizact Cloth Roll 307EA was designed for dimensioning and polishing hard metals prior to plating or buffing. Microreplicated structures containing aluminum oxide is resin-bonded to a flexible JE-weight rayon backing and a grinding aid helps to keep the work surface cool and protect from thermal damage. 3M Trizact Cloth Roll 307EA is available in a range of grades, from A100 to A6.

3M Cubitron II Vitrified Grinding Wheels 92VC are the vitrified bonded grinding wheels containing 30% precision shaped grains with geometrically defined cutting edges for conventional precision grinding applications.

3M Diamond Resin Wheel 634AH is a general purpose wheel designed for the production and re-sharpening of tungsten carbide-tipped saw blades. This wheel offers high material removal rates and good form retention.

Designed with a strong polyester film backing and sharp diamond mineral, the 3M Diamond Microfinishing Film Roll 675L delivers fine finishes on hard metals like thermal spray coating, ceramics, carbides, chilled iron and granite.

3M Microfinishing Film Roll 373L quickly cuts, shapes and polishes, delivering uniform, close-tolerance finishes on parts used in metalworking applications.

3M Cubitron II Cloth Belt 966F is designed to provide efficient surface finishing on a variety of metals including stainless steel, titanium and other high nickel alloys. Made with 3M precision shaped ceramic grain attached to a water resistant polyester cloth backing, this belt can aggressively sand and finish surface without discoloring the metal in either wet or dry applications.

3M Cloth Belt 571F is an abrasive sanding belt for grinding, weld removal, finishing and blending on metal surfaces and contours. It is constructed on a tough, Y-weight backing with a closed coat of alumina-zirconia grains for work on a variety of substrates. The water-resistant material allows for the use of liquid coolants to further reduce heat buildup.

3M Cloth Belt 384F is a general-purpose aluminum oxide cloth-backed belt recommended for metal deburring, general metalworking, and some woodworking applications. It is optimized for use on mild steel and carbon steel, and is also effective on softer metals like aluminum, bronze and brass.

3M Hybrid Diamond Grinding Wheel 6PHU is the high-performance abrasive wheel with a metal hybrid bond and diamond grit system.