Blog

3M Trizact Cloth 953FA is constructed with a 3M proprietary ceramic grain for fast, aggressive cutting action. An XF-weight cloth backing is durable with additional flexibility. It is ideal for dimensioning and blending in wet centerless or flat grinding applications on ferrous, stainless steel and nonferrous workpieces.

The 3M Trizact Cloth Belt 337DC delivers consistently in intermediate to final finish, medium pressure applications. Designed with aluminum oxide and a grinding aid on a durable X- weight cloth backing, this belt is available in widths from 1/2 to 24 inches and grades from A300 to A30.

Take advantage of increased durability and cutting efficiency with 3M Cloth Belt 777F. This belt features a blend of 3M Ceramic Abrasive Grain and aluminum oxide that outperforms aluminum oxide belts in stock removal and metal finishing applications. The heavyweight cloth backing supports high-pressure applications, performs well on heat-sensitive metals, and can be used dry or with lubricant.

3M Trizact Cloth Belt 237AA uses proprietary microreplication technology by 3M where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

3M Trizact Cloth Belt 217EA uses proprietary microreplication technology in which micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a JE-weight rayon backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

When traditional aluminum oxide belts aren’t cutting it, try 3M Cloth Belt 577F with alumina zirconia abrasive grain. It offers increased cutting efficiency compared to aluminum oxide, and has a heavy, water-resistant polyester backing that stands up to high-pressure applications and edge work.

3M Trizact Cloth Belt 237AA uses proprietary microreplication technology by 3M where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

3M Cloth Disc 361F is a durable abrasive product constructed with aluminum oxide abrasive mineral and a water-resistant polyester backing. The resin-coated design offers heat resistance and the YF-weighted cloth backing can withstand aggressive sanding action. The Cloth Disc 361F provides consistent performance for grinding, blending, deburring and finishing on a variety of metal.

3M Trizact Cloth Disc 237AA features sharp-cutting aluminum oxide mineral bonded to a durable X-weight, water-resistant polyester cloth backing. This abrasive works well for a wide range of low- to medium-pressure applications: finishing, polishing, blending and deburring. It can be used on many metals, including mild and stainless steel.

3M PSA Cloth Disc 348D is a heavy-duty sanding disc that features a high-strength pressure sensitive adhesive backing that adheres to a backup pad or a steel platen for an efficient application and clean removal.

3M Microfinishing Film Belt 472L was designed for superfinishing and powertrain microfinishing. This belt helps achieve uniform, consistent finishes on parts where close tolerances are important.

The 3M Diamond Cloth Belt 651WY is designed for grinding and polishing ceramics, carbide, and cast iron. It uses micron-graded diamond particles affixed to a durable, x-weight waterproof cloth backing with heat-resistant resin bond.