Blog

Scotch-Brite Cut and Polish Wheels are built for aggressive blending and finishing applications. Harder than other finishing wheels, Cut and Polish Wheels are good for defect removal or heavy scratch blending and produces a finish with a tight scratch pattern.

Scotch-Brite EX2 Deburring Wheel is a convolute-constructed wheel that provides mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing, and finishing. This deburring wheel performs best when consistently presented with a sharp edge or metal burrs.

The 3M Flap Wheel 741A was designed for light grinding, blending, deburring, and polishing on a variety of metals. Ceramic abrasive covered flaps conform to the work piece and provide a smooth clean finish.

3M Glass Seaming Cloth Belt 461F is a flexible abrasive belt specifically designed for grinding, finishing and polishing on glass and mirrors. Constructed on a water resistant, polyester cloth backing and resin bonded with a sharp silicon carbide mineral, this belt is a reliable abrasive for even the most delicate jobs.

The 15˝ x 15˝ blocks of material in the Standard Abrasives Unitized Block – 800 Series have a hard density and extra tough durability, making them a good match for heavy-duty edge deburring and stainless steel polishing applications. The blocks can be cut and customized into various shapes for a range of uses.

The 15˝ x 15˝ blocks of material in the Standard Abrasives Unitized Block – 700 Series have a medium to hard density and robust durability, making them a good match for tough deburring, cleaning and finishing applications that require increased aggressiveness. The blocks can be cut and customized into various shapes for a range of uses.

The 15˝ x 15˝ blocks of material in the Standard Abrasives Unitized Block – 600 Series have a soft to medium density, making them a good match for medium-pressure cleaning and blending. The blocks are also effective for removing small burrs and radiusing edges, and can be customized into various shapes for a range of uses.

The Standard Abrasives Light Deburring Wheel finishes and deburrs parts with critical tolerances and may be used on automated equipment, straight shaft stationary and portable tools as well as feed-through machines.

Standard Abrasives Aluminum Oxide EP Buff and Blend Roll is a High cut low, easy to use and convert into other forms, like discs, wheels, flap brushes, and any other unique forms. Available in Very Fine, Fine and Medium.

Standard Abrasives Surface Conditioning HS Roll is made with tear-resistant, high-strength buff and blend material that won’t fray in the face of hard edges. For these reasons, it’s a good match for final finishing on irregular shaped parts, like pipe threads and edges of molded glass containers.

3M Cloth Belt 464W is an abrasive sanding belt constructed on a heavy, YF-weight backing that features closed coat construction for aggressive sanding action. The silicon carbide abrasive, Cork Particles and flexible backing make this cloth an ideal product for metal surface sanding and final cosmetic polish, including the required “blue” finish on stainless steel.

Designed to utilize the material face rather than the edge, the Standard Abrasives Buff and Blend HS Flap Brush helps achieve fine finishes without leaving lines on the workpiece. The high strength (HS) material makes it an ideal choice for blending, cleaning, deburring and finishing on stainless steel, brass and aluminum, especially where uniform and long line brushed finishes are desired.