Blog

3M Trizact Cloth Belt 237AA uses proprietary microreplication technology by 3M where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

The green Scotch-Brite Disc 96 is effective for general purpose scrubbing, cleaning, polishing and finishing. This durable disc contains very fine aluminum oxide grain and is designed for faster action and prolonged utility over common green pads. Non-rusting and resilient, it works like steel wool without leaving metal slivers behind.

3M Trizact Cloth Belt 237AA uses proprietary microreplication technology by 3M where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

3M Cartridge Roll 341D provides easy access to small, hard-to-reach spaces for sanding and finishing. As the outermost abrasive layer wears down, the cloth backing frays to expose fresh abrasive layers for continued cutting action.

3M Cartridge Roll 341D provides easy access to small, hard-to-reach spaces for sanding and finishing. As the outermost abrasive layer wears down, the cloth backing frays to expose fresh abrasive layers for continued cutting action.

Standard Abrasives Silicon Carbide Buff and Blend Roll imparts a satin finish to large surfaces when used with a power sander, and enables custom conversion or sheet sizing for use by hand or when working with a lathe or spindle-held part. The non-woven nylon material combines toughness with pliability, ensuring a consistent finish over contours and surface irregularities.

Special resins and the addition of innovative additives lend these grinding wheels great flexibility with simultaneously high edge stability. These wheels are therefore suitable for web thinning, clearance angle grinding, and relief grinding when manufacturing tools as well as when resharpening them. They are especially suitable for sharpening worn tools on high performance machines

3M Flexible Diamond Type C Belt 6450J features micron-graded diamond mineral. A metal bond securely anchors diamond particles to a premium backing in an open dot pattern. This provides durability and long life. In addition, the open dot pattern produces aggressive cutting action while reducing loading.

3M Abrasive Cloth Band 341D is a spiral band or short tube that conforms to inner and outer contours for sanding and shaping. Fast-cutting aluminum oxide abrasive grains are resin-bonded to a durable cloth backing to provide fast continuous cut and long-life performance. This versatile product can be used for grinding to remove parting lines or seams, imperfections, and burrs.

The 3M Diamond Resin Bond Wheel 633AH is a general purpose wheel designed for the production and re-sharpening of tungsten carbide tipped saw blades. This wheel offers high material removal rates and good form retention.

The 3M Diamond Polyimide Wheel 665PL is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best balance of form retention and the free-cut rate when used with water based lubricants.

The 3M Flap Wheel 741A was designed for light grinding, blending, deburring, and polishing on a variety of metals. Ceramic abrasive covered flaps conform to the work piece and provide a smooth clean finish.