Blog

Wheels in the Standard Abrasives Silicon Carbide Unitized Wheel 600 Series have a soft to medium density, making them a good match for medium-pressure finishing and polishing on flat or contoured parts. Choose a 600 Series wheel when your application calls for an upgrade in edge durability over a Series 500 wheel.

The 3M Diamond Polyimide Wheel 665PL is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best balance of form retention and the free-cut rate when used with water based lubricants.

Wheels in the Standard Abrasives Silicon Carbide Unitized Wheel 500 Series have a soft, conformable density, making them a good match for light-pressure blending, finishing and polishing on flat or contoured parts. When strict tolerances are required, these non-woven wheels offer operators the finesse needed to deliver precise results.

The 3M Diamond Polyimide Wheel 664PL is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best balance of form retention and the free-cut rate when used with water based lubricants.

The 3M Diamond Polyimide Wheel 664PL is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best balance of form retention and the free-cut rate when used with water based lubricants.

The 3M Diamond Polyimide Wheel 665PL is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best balance of form retention and the free-cut rate when used with water based lubricants.

Standard Abrasives Aluminum Oxide HS Buff and Blend Roll is high strength material that is very tear resistant, so it is a good match for final finishing on irregularly shaped parts, because it will not break down or fray when it comes to contact with contours and extrusions. Most durable material under abusive conditions like sharp edges and deburring.  Available in Very Fine, Medium and Coarse, and for use in power tools

3M Microfinishing Film Belt 372L is designed to help you get the finest finish possible, and is available in a wide variety of forms. It features micron-graded aluminum oxide abrasive bonded to a durable polyester film backing to produce a fast cut-rate and uniform finish on composites, plastic, fiberglass and metal.

3M Paper Roll 366UZ combines a heavy F-weight backing with aluminum oxide mineral for effective hand sanding and finishing as well as use on drum sanders. It cuts well, but still delivers the fine finish industrial professionals seek when finishing parts like wood panels and composites.

The 3M Cloth Roll 341D is a durable, closed coat aluminum oxide abrasive recommended for metal deburring, general metalworking, and some woodworking applications.

3M Abrasive Cloth Band 341D is a spiral band or short tube that conforms to inner and outer contours for sanding and shaping. Fast-cutting aluminum oxide abrasive grains are resin-bonded to a durable cloth backing to provide fast continuous cut and long-life performance. This versatile product can be used for grinding to remove parting lines or seams, imperfections, and burrs.

The 3M Cloth Roll 341D is a durable, closed coat aluminum oxide abrasive recommended for metal deburring, general metalworking, and some woodworking applications.