Blog

3M Uncoated Cloth Belt is an uncoated, nonabrasive belt construction. Belts are available in a variety of widths, lengths and backing weights. These belts are typically used for polishing with an applied compound or cleaning applications in which non-abrasive techniques are required.

3M Trizact Cloth Belt 237AA uses proprietary microreplication technology by 3M where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

3M Uncoated Cloth Belt is an uncoated, nonabrasive belt construction. Belts are available in a variety of widths, lengths and backing weights. These belts are typically used for polishing with an applied compound or cleaning applications in which non-abrasive techniques are required.

Scotch-Brite EXL Unitized Wheels feature a soft, conformable consistency that effectively smooths, deburrs and finishes the edges of metal alloys, as well as many plastics and composites. There are a variety of densities and grades starting from a very soft 2 density for applications requiring conformability to a hard, aggressive 8 density for maximum cut and durability.

The Scotch-Brite Clean and Strip Unitized Wheel is a unitized wheel made for aggressive coating removal, cleaning welds, and removing rust, paint and coatings. The layered, durable unitized wheel construction and hard 7 density, with low conformability, make it a great match for edges, when durability is a must.

Scotch-Brite Metal Blending Roll is specifically designed with heat-resistance and finishing properties that support blending and finishing on stainless steel, and doubles up as a good general cleaning sheet roll. Choose this sheet roll to blend surface scratches on many metals, wood and synthetic surfaces.

Scotch-Brite EXL Unitized Wheels feature a soft, conformable consistency that effectively smooths, deburrs and finishes the edges of metal alloys, as well as many plastics and composites. There are a variety of densities and grades starting from a very soft 2 density for applications requiring conformability to a hard, aggressive 8 density for maximum cut and durability.

3M Hookit Hand Block helps level repair areas with greater ease. Use this accessory item with the Hookit abrasive products to achieve more consistent, uniform sanding results. This hand block when used in combination with Hookit abrasives is ideal for achieving a true flat surface.

Scotch-Brite Finishing Flap Brush is constructed from sections of non-woven material slit lengthwise and bonded to a cylindrical core. This long-lasting brush provides improved consistency and greater control over a number of critical prep and finishing tasks, to include polishing and aesthetic finishing, such as brushed finishes on copper, brass, stainless steel, aluminum, and other metals.

The Standard Abrasives Aluminum Oxide 800 Series Unitized Wheel is a hard density wheel designed with extra tough edge durability, making it a good match for heavy-duty edge deburring and stainless steel polishing applications.

Balancing sharp cutting action with fine finishing, the 3M Diamond Metal Bond PSA Disc 6MB8 is made by adhering micron-graded diamond mineral to a brass plate, which is ideal for lapping and similar applications.

Standard Abrasives Aluminum Oxide Cartridge Roll is ideal for fast cutting on irregular contours and other hard-to-reach areas on all ferrous metals.