Blog

3M Circuit Plating Tape 1280 with polyester film used for PCB masking tape or other high temperature applications. Red. 3.6 mil thick.

3M Thermally Conductive Adhesive Transfer Tape 8810 is designed to provide a preferential heat-transfer path between heat-generating components and heat sinks or other cooling devices (e.g., fans, heat spreaders or heat pipes).

3M Circuit Plating Tape 1280 with polyester film used for PCB masking tape or other high temperature applications. Red. 3.6 mil thick.

3M Circuit Plating Tape 851 with polyester film and blended silicone and rubber adhesive used for PCB masking and other high temperature applications. Thick adhesive coating. Green, 4.0 mil thick.

Precisely graded diamond particles coated on a polyester film. Provides a consistent, repeatable finish on extremely hard materials. Available in several grades between 0.10 and 30.0 micron.

3M Thermally Conductive Silicone Interface Pad 5595S is a soft, silicone elastomer with thermal conductivity of 1.6 W/m-K. Conformable at low pressure to minimize stress on components and fill gaps. Good dielectric properties.

3M ECG8035 is a double-sided tape with good electrical conductivity and excellent cushion/recovery properties. Offers excellent gap filling performance while maintaining good electrical grounding potential.

3M Thermally Conductive Silicone Interface Pad 5595S is a soft, silicone elastomer with thermal conductivity of 1.6 W/m-K. Conformable at low pressure to minimize stress on components and fill gaps. Good dielectric properties.

3M Bumpon Resilient Rollstock SJ5916 is a self-adhesive rubber bumper designed to be used as feet, stops and spacers. The rollstock format is excellent for die-cut shapes with various thickness requirements.

3M EMI Shielding Absorber AB6000HF/SHF Series is a hybrid shielding magnetic absorber consisting of a metal EMI shielding layer and absorbing layer with an insulation layer in between. The 3M AB6000HF/SHF provides good EMI absorbing and high-frequency EMI shielding for a lower signal-to-noise ratio (SNR). An acrylic pressure-sensitive adhesive and a removable release liner make applying the material easy and efficient. Available in sheets and rolls, these EMI absorbers are excellent for complex EMI applications requiring noise suppression, and shielding up to 18 GHz.

The 3M EMI Absorber AB7000HF Series is a high-permeability magnetic EMI absorber for near-field applications. It consists of flexible polymer resin loaded with a filler of soft metal flakes for excellent absorption at frequencies from 300 MHz to 4 GHz. Target frequency range– the “sweet spot” for peak performance – is 800 MHz – 2.5 GHz. An acrylic non-conductive pressure-sensitive adhesive on one side makes applying the material easy and efficient. These sheet type EMI absorbers are excellent for absorbing near-field EMI inside and around electronic devices and assemblies.

3M Bumpon Resilient Rollstock SJ5908 is a self-adhesive rubber bumper designed to be used as feet, stops and spacers. The rollstock format is excellent for die-cut shapes with various thickness requirements.