Blog

3M Thermally Conductive Interface Tape (TCIT) 8711 Series is designed to provide a preferential heat-transfer path between heat-generating components and heat sinks or other cooling devices (e.g., fans, heat spreaders or heat pipes).

3M Thermally Conductive Acrylic Interface Pad 5589H is a very conformable and soft pad with high thermal conductivity of 2.0 W/m-K (3M test method). This pad consists of a slightly tacky acrylic elastomeric sheet filled with thermally conductive ceramic particles. It is designed to transfer heat from heat generating components to heat sinks and cooling devices, improving device reliability and extending the component’s life.

3M Thermally Conductive Interface Tape 8926 is a pressure sensitive tape designed to have good converting ability, handing and re-workability through the introduction of a thin PET carrier. 3M tape series 8926 is designed with a soft acrylic polymer and multiple thickness options to allow excellent wet-out or conformability to many surfaces.

3M Thermally Conductive Adhesive Transfer Tape 8810 is designed to provide a preferential heat-transfer path between heat-generating components and heat sinks or other cooling devices (e.g., fans, heat spreaders or heat pipes)

3M Metal Shielding Gasket MSG6100F consists of a conductive fabric, highly conductive grey foam, and black pressure sensitive adhesive (PSA).

3M Thermally Conductive Acrylic Interface Pad 5571 is a thermal interface material designed to provide a heat transfer path from heat-generating components to a cooling device (e.g., aluminum plate or heat sink) to improve device reliability and component lifespan. This product can be used for different applications including EV battery thermal management and more.

3M Lapping Film Sheet 261X is the standard of 3M’s lapping films. The product is made from precisely graded aluminum oxide particles coated on a 3 mil polyester film. The product provides uniform finishes on various substrates and delivers consistent cut rate, finish and life.

3M Thermally Conductive Acrylic Interface Pad 5571 is a thermal interface material designed to provide a heat transfer path from heat-generating components to a cooling device (e.g., aluminum plate or heat sink) to improve device reliability and component lifespan. This product can be used for different applications including EV battery thermal management and more.

3M Polishing Film 591X with plain back is comprised of micron graded mineral that has been coated onto a fibrous (flocked) polyester film backing. Designed to break down into a slurry during use with water.

3M Diamond Lapping Film Sheet 661X is made from precisely graded diamond particles coated on a polyester film. 3M film 661X provides a consistent, repeatable finish on extremely hard materials while delivering fast cut and increased throughput.

3M Thermally Conductive Adhesive Transfer Tape 8810 is designed to provide a preferential heat-transfer path between heat-generating components and heat sinks or other cooling devices (e.g., fans, heat spreaders or heat pipes)

3M Thermally Conductive Acrylic Interface Pad 5550H is a thermal interface material designed to transfer heat from heat-generating components to heat sinks and cooling devices to improve device reliability and component lifespan. This product can be used for different applications including EV battery thermal management and more.