Blog

3M High Shear Pressure Sensitive Cover Tape 2668 is a transparent polyester tape with a synthetic, room temperature pressure sensitive adhesive (PSA) zone along each edge.

3M High Shear Pressure Sensitive Cover Tape 2668 is a transparent polyester tape with a synthetic, room temperature pressure sensitive adhesive (PSA) zone along each edge.

3M Diamond Lapping Film 663X has a stronger resin system that gives this product added toughness and longer life. Used primarily in superfinishing, roll polishing, and flat lapping applications. Available in 30.0, 45.0, and 60.0 micron grades.

3M Diamond Lapping Film 663X has a stronger resin system that gives this product added toughness and longer life. Used primarily in superfinishing, roll polishing, and flat lapping applications. Available in 30.0, 45.0, and 60.0 micron grades.

3M Diamond Lapping Film 663X has a stronger resin system that gives this product added toughness and longer life. Used primarily in superfinishing, roll polishing, and flat lapping applications. Available in 30.0, 45.0, and 60.0 micron grades.

3M Thermally Conductive Silicone Interface Pad 5584 is a soft, silicone elastomer with thermal conductivity of 1.1 W/m-K. Conformable at low pressure to minimize stress on components and fill gaps. Good dielectric properties.

3M Thermally Conductive Silicone Interface Pad 5584 is a soft, silicone elastomer with thermal conductivity of 1.1 W/m-K. Conformable at low pressure to minimize stress on components and fill gaps. Good dielectric properties.

3M Thermally Conductive Silicone Interface Pad 5584 is a soft, silicone elastomer with thermal conductivity of 1.1 W/m-K. Conformable at low pressure to minimize stress on components and fill gaps. Good dielectric properties.

A silica mineral coated on a 3 mil backing for the final step in polishing fiber optic ceramic connectors. Standard life product works on many different brands of polishing machines.

3M Diamond Lapping Film 662XW has a higher diamond concentration and a stronger resin bond to give this product added durability and increased cut rate over the standard diamond lapping film. Available in 0.50, 1.0, 1.50, 3.0, 6.0 and 9.0 micron grades.

Precisely graded diamond particles coated on a polyester film. Provides a consistent, repeatable finish on extremely hard materials. Available in several grades between 0.10 and 30.0 micron.

3M Embedded Capacitance Material (ECM) is laminate of copper and epoxy with a high dielectric constant filler material intended as a layer in a printed circuit board, flex circuit, or rigid-flex circuit