Blog

3M Trizact Cloth Belt 237AA uses proprietary microreplication technology by 3M where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

3M Cubitron II Fibre Disc 987C offers significant gains in productivity on medium to heavy-duty operations thanks to the exceptionally high-performing 3M Precision-Shaped Grain combined with a stiff fiber backing. This disc achieves a higher cut-rate, greater durability, and longer life than other fiber discs — all with less grinding pressure.

3M Cloth Belt 747D is made with a blend of aluminum oxide and 3M ceramic grain and is designed for superior metal finishing on a variety of metals including nickel and stainless steel.

3M Cloth Belt 707E uses a 3M Ceramic Aluminum Oxide Abrasives blend and is designed for light to moderate-pressure stock removal and finishing operations when you need a conformable belt for contoured surfaces. The belt is constructed with a blend of 3M Ceramic Abrasive Grain and premium aluminum oxide to offer more durability and cutting efficiency over non-ceramic abrasives.

3M Trizact Cloth Belt 363FC utilizes an aluminum oxide mineral bonded to a YF-weight polyester cloth backing. 363FC belts are consistent “go-to first” products for a wide range of applications from heavy deburring and defect removal to intermediate finishing. These belts are available in grades from A300 to A35.

3M Cartridge Roll 341D provides easy access to small, hard-to-reach spaces for sanding and finishing. As the outermost abrasive layer wears down, the cloth backing frays to expose fresh abrasive layers for continued cutting action.

3M Cartridge Roll 341D provides easy access to small, hard-to-reach spaces for sanding and finishing. As the outermost abrasive layer wears down, the cloth backing frays to expose fresh abrasive layers for continued cutting action.

3M Cubitron II Vitrified Grinding Wheels – 93VE are the vitrified bonded grinding wheels containing 100% Cubitron II precision shaped grain (PSG), featuring geometrically defined cutting edges. They’re ideal for single rib profile and bevel grinding of gear parts.

3M Resin CBN Grinding Wheel 1CBB is the series of face and cup grinding wheels featuring a phenolic resin bond and a CBN grit system, which is suitable for use with oil and emulsion lubricants.

Special resins and the addition of innovative additives lend these grinding wheels great flexibility with simultaneously high edge stability. These wheels are therefore suitable for web thinning, clearance angle grinding, and relief grinding when manufacturing tools as well as when resharpening them. They are especially suitable for sharpening worn tools on high performance machines

3M CBN Polyimide Wheel 164PL is used for grinding primary and secondary relief angles on cutting tools made of tool steel and high speed steel. This general purpose wheel offers high cut rates, increased form holding, and increased thermal stability during higher temperature grinding operations.

The 3M Microfinishing Film Roll 362L quickly cuts, shapes and polishes, delivering close-tolerance finishes for precision tooling and machining applications. Available in 9-100 micron grades, aluminum oxide is electrostatically oriented and bonded to a polyester film backing. A Type S (smooth) backsize coating provides slip resistance for microfinishing machines.