Blog

3M Cut-Off Wheel 664BL is used to trim carbide cutting tool blanks to length for the cutting tool manufacturing industry.

The 3M Diamond Polyimide Wheel 665PL is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best balance of form retention and the free-cut rate when used with water based lubricants.

3M Diamond Wheel 665PK is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best balance of form retention and wheel life at average cut rates.

Scotch-Brite Metal Finishing Wheel combines conformability with consistent abrasive cutting action to provide uniform brushed stainless and satin finishes. The Metal Finishing Wheel is also used effectively to blend and match #3 or #4 mill finishes on stainless steel and to create brushed or satin finishes on items such as cutlery, appliance trim, builders hardware, and plumbing fixtures.

3M Trizact Cloth Belt 237AA uses proprietary microreplication technology by 3M where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

3M Trizact Cloth Belt 237AA uses proprietary microreplication technology by 3M where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

3M Trizact Cloth Belt 237AA uses proprietary microreplication technology by 3M where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

The 15˝ x 15˝ blocks of material in the Standard Abrasives Unitized Block – 700 Series have a medium to hard density and robust durability, making them a good match for tough deburring, cleaning and finishing applications that require increased aggressiveness. The blocks can be cut and customized into various shapes for a range of uses.

The 15˝ x 15˝ blocks of material in the Standard Abrasives Unitized Block – 600 Series have a soft to medium density, making them a good match for medium-pressure cleaning and blending. The blocks are also effective for removing small burrs and radiusing edges, and can be customized into various shapes for a range of uses.

The 15˝ x 15˝ blocks of material in the Standard Abrasives Unitized Block – 700 Series have a medium to hard density and robust durability, making them a good match for tough deburring, cleaning and finishing applications that require increased aggressiveness. The blocks can be cut and customized into various shapes for a range of uses.

The 15˝ x 15˝ blocks of material in the Standard Abrasives Unitized Block – 700 Series have a medium to hard density and robust durability, making them a good match for tough deburring, cleaning and finishing applications that require increased aggressiveness. The blocks can be cut and customized into various shapes for a range of uses.

Extra hard Standard Abrasives 900 Series Unitized Block is the most dense and aggressive block in the Standard Abrasives Unitized Block line. The 15˝ x 15˝ non-woven abrasive block is engineered with the highest level of toughness and edge durability for effective removal of challenging burrs and efficient polishing of harder metals. The block can be cut and customized for a range of uses.