Blog

3M Cubitron II Vitrified Grinding Wheels 92VC are the vitrified bonded grinding wheels containing 30% precision shaped grains with geometrically defined cutting edges for conventional precision grinding applications.

The 3M Diamond Polyimide Wheel 665PL is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best balance of form retention and the free-cut rate when used with water based lubricants.

The 3M Diamond Polyimide Wheel 665PL is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best balance of form retention and the free-cut rate when used with water based lubricants.

3M Sanding Screen Sheet 483W employs fast-cutting, sharp silicon carbide mineral bonded to a durable screen cloth mesh. Extremely load-resistant, use it wet or dry for buffing and finishing both soft woods and metal surfaces.

3M Diamond Wheel 665PK is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best balance of form retention and wheel life at average cut rates.

3M Polyimide Hybrid Diamond Wheel 6PBP is the series of versatile peripheral grinding wheels with a hybrid resin bond and diamond grit system. They’re suitable for use with oil and emulsion lubricants.

Fast and free-cutting, the 3M Cut-Off Wheel 654BJ is used to trim carbide cutting tool blanks to length for the cutting tool manufacturing industry. This 1A1R wheel is offered in offered in 100 and 220 grit in the following dimension: 6 inches in diameter,0.035 inches thick, and a 1.25-inch arbor hole.

3M Cut-Off Wheel 664BL is used to trim carbide cutting tool blanks to length for the cutting tool manufacturing industry.

3M Cubitron II Cloth Belt 991FZ offers revolutionary performance with 3M Precision Shaped Grain on a polyester cloth backing. This high-performing belt is constructed with a closed coat and an additional anti-static treatment to further prevent loading during use on wood. It can be used in either wet or dry applications.

3M Cubitron II Vitrified Grinding Wheels – 93VE are the vitrified bonded grinding wheels containing 100% Cubitron II precision shaped grain (PSG), featuring geometrically defined cutting edges. They’re ideal for single rib profile and bevel grinding of gear parts.

3M Cubitron II Vitrified Grinding Wheels 92VC are the vitrified bonded grinding wheels containing 30% precision shaped grains with geometrically defined cutting edges for conventional precision grinding applications.

Scotch-Brite Finishing Film Backed Belt provides increased wear resistance and longer life when used for light-pressure finishing applications. A built-in lubricant helps it run cooler, reduce loading and increase belt life. A-Very Fine Belts can be used in place of cork belts, buffs and compounds, rag wheels with compounds, coated abrasive belts and flap wheels and bristle brushes.