Blog

3M Trizact Cloth Belt 363FC utilizes an aluminum oxide mineral bonded to a YF-weight polyester cloth backing. 363FC belts are consistent “go-to first” products for a wide range of applications from heavy deburring and defect removal to intermediate finishing. These belts are available in grades from A300 to A35.

Take advantage of increased durability and cutting efficiency with 3M Cloth Belt 777F. This belt features a blend of 3M Ceramic Abrasive Grain and aluminum oxide that outperforms aluminum oxide belts in stock removal and metal finishing applications. The heavyweight cloth backing supports high-pressure applications, performs well on heat-sensitive metals, and can be used dry or with lubricant.

The 3M Diamond Wheel 650HJ is used to generate the flute which is the helical or straight groove in the body of the cutting tools made from tungsten carbide. This hybrid bonded wheel offers high cut rates, good form retention, and increased thermal stability during higher temperature grinding operations.

3M Cut-Off Wheel 664BL is used to trim carbide cutting tool blanks to length for the cutting tool manufacturing industry.

3M Diamond Resin Wheel 664BK is used for high performance grinding of carbide cutting tools. It has superior form retention and runs with water-based coolant. From 100 to 400 mesh grits and dual grit – (120/320).

The 3M CBN Polyimide Wheel 184PN is used to generate the flute which is the helical or straight groove in the body of the cutting tools made of tool steel and high speed steel. The polyimide bond wheel construction offers excellent form retention and increased thermal stability under higher temperature grinding operations.

The 3M Diamond Polyimide Wheel 665PL is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best balance of form retention and the free-cut rate when used with water based lubricants.

The 3M Cut-Off Wheel 654BK is a general purpose cut-off wheel for carbide tool manufacturing. With a highly concentrated diamond abrasive mineral, solid construction and a steel core, it is commonly used for trimming tool blanks on carbides, high speed steels and hard metals.

Featuring a waterproof polyester backing and 3M microreplication technology, the 3M Trizact PSA Film Sheet 268XA is specially designed for polishing and finishing applications on a variety of substrates.

When traditional aluminum oxide belts aren’t cutting it, try 3M Cloth Belt 577F with alumina zirconia abrasive grain. It offers increased cutting efficiency compared to aluminum oxide, and has a heavy, water-resistant polyester backing that stands up to high-pressure applications and edge work.

3M Trizact Cloth Belt 363FC utilizes an aluminum oxide mineral bonded to a YF-weight polyester cloth backing. 363FC belts are consistent “go-to first” products for a wide range of applications from heavy deburring and defect removal to intermediate finishing. These belts are available in grades from A300 to A35.

3M Cloth Belt 707E uses a 3M Ceramic Aluminum Oxide Abrasives blend and is designed for light to moderate-pressure stock removal and finishing operations when you need a conformable belt for contoured surfaces. The belt is constructed with a blend of 3M Ceramic Abrasive Grain and premium aluminum oxide to offer more durability and cutting efficiency over non-ceramic abrasives.