Blog

Fast and free-cutting, the 3M Cut-Off Wheel 654BJ is used to trim carbide cutting tool blanks to length for the cutting tool manufacturing industry. This 1A1R wheel is offered in offered in 100 and 220 grit in the following dimension: 6 inches in diameter,0.035 inches thick, and a 1.25-inch arbor hole.

3M Cut-Off Wheel 664BL is used to trim carbide cutting tool blanks to length for the cutting tool manufacturing industry.

3M Cubitron II Cloth Belt 991FZ offers revolutionary performance with 3M Precision Shaped Grain on a polyester cloth backing. This high-performing belt is constructed with a closed coat and an additional anti-static treatment to further prevent loading during use on wood. It can be used in either wet or dry applications.

3M Cubitron II Vitrified Grinding Wheels – 93VE are the vitrified bonded grinding wheels containing 100% Cubitron II precision shaped grain (PSG), featuring geometrically defined cutting edges. They’re ideal for single rib profile and bevel grinding of gear parts.

3M Cubitron II Vitrified Grinding Wheels 92VC are the vitrified bonded grinding wheels containing 30% precision shaped grains with geometrically defined cutting edges for conventional precision grinding applications.

Scotch-Brite Finishing Film Backed Belt provides increased wear resistance and longer life when used for light-pressure finishing applications. A built-in lubricant helps it run cooler, reduce loading and increase belt life. A-Very Fine Belts can be used in place of cork belts, buffs and compounds, rag wheels with compounds, coated abrasive belts and flap wheels and bristle brushes.

3M Cubitron II Vitrified Grinding Wheels 92VC are the vitrified bonded grinding wheels containing 30% precision shaped grains with geometrically defined cutting edges for conventional precision grinding applications.

3M Cloth Belt 302D is an aluminum oxide belt with open coat construction and a flexible J-weight backing that conforms well for sanding contours and complex parts. It is best-suited for light grinding, finishing, deburring and setting the grain on carbon steel and stainless steel, as well as soft metals like aluminum, brass, bronze and copper.

3M Vitrified Grinding Wheels 91VB are the vitrified bonded wheels for optimising roughing and finishing process steps while grinding gear parts.

When traditional aluminum oxide belts aren’t cutting it, try 3M Cloth Belt 577F with alumina zirconia abrasive grain. It offers increased cutting efficiency compared to aluminum oxide, and has a heavy, water-resistant polyester backing that stands up to high-pressure applications and edge work.

3M CubitronII Resin Bond Grinding Wheel 92BC are resin bonded wheels featuring a mix of green silicon carbide, monocrystalline aluminium oxide and precision shaped grains with geometrically defined cutting edges for conventional hot rollgrinding operations.

3M Cubitron II Vitrified Grinding Wheels 92VC are the vitrified bonded grinding wheels containing 30% precision shaped grains with geometrically defined cutting edges for conventional precision grinding applications.