Blog

Standard Abrasives GP Plus Bun can be converted into desired widths of convolute wheels for deburring, blending, finishing, polishing and cleaning applications that will not break edges or remove metal, these wheels are used on automated equipment, straight shaft stationary and portable tools and feed-through machines.

When traditional aluminum oxide belts aren’t cutting it, try 3M Cloth Belt 577F with alumina zirconia abrasive grain. It offers increased cutting efficiency compared to aluminum oxide, and has a heavy, water-resistant polyester backing that stands up to high-pressure applications and edge work.

The 3M Diamond Polyimide Wheel 665PL is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best balance of form retention and the free-cut rate when used with water based lubricants.

Standard Abrasives GP Plus Bun can be converted into desired widths of convolute wheels for deburring, blending, finishing, polishing and cleaning applications that will not break edges or remove metal, these wheels are used on automated equipment, straight shaft stationary and portable tools and feed-through machines.

3M Paper Belt 466UZ is a smooth running belt constructed with silicon carbide mineral, bonded to an F-weight paper backing. The semi-closed coat construction efficiently sands and finishes flat surfaces in woodworking applications. F-weight is one of the heaviest, most durable paper backings available and will achieve finer finishes than cloth backed belts in the same grade.

Standard Abrasives GP Plus Bun can be converted into desired widths of convolute wheels for deburring, blending, finishing, polishing and cleaning applications that will not break edges or remove metal, these wheels are used on automated equipment, straight shaft stationary and portable tools and feed-through machines.

3M Cubitron II Vitrified Grinding Wheels 92VC are the vitrified bonded grinding wheels containing 30% precision shaped grains with geometrically defined cutting edges for conventional precision grinding applications.

Standard Abrasives GP Plus Bun can be converted into desired widths of convolute wheels for deburring, blending, finishing, polishing and cleaning applications that will not break edges or remove metal, these wheels are used on automated equipment, straight shaft stationary and portable tools and feed-through machines.

Special resins and the addition of innovative additives lend these grinding wheels great flexibility with simultaneously high edge stability. These wheels are therefore suitable for web thinning, clearance angle grinding, and relief grinding when manufacturing tools as well as when resharpening them. They are especially suitable for sharpening worn tools on high performance machines

Standard Abrasives GP Plus Bun can be converted into desired widths of convolute wheels for deburring, blending, finishing, polishing and cleaning applications that will not break edges or remove metal, these wheels are used on automated equipment, straight shaft stationary and portable tools and feed-through machines.

3M CBN Polyimide Wheel 164PL is used for grinding primary and secondary relief angles on cutting tools made of tool steel and high speed steel. This general purpose wheel offers high cut rates, increased form holding, and increased thermal stability during higher temperature grinding operations.

3M Cloth Roll is a high-performance abrasive material built for versatility and value. Powered by 3M Precision-Shaped Grain, it lasts longer and cuts faster than conventional aluminum oxide and alumina zirconia abrasive – and it’s priced for affordability and everyday use. This unbeatable combination of performance and value can increase productivity while also lowering your abrasive spend.