Blog

3M Diamond Resin Wheel 634AH is a general purpose wheel designed for the production and re-sharpening of tungsten carbide-tipped saw blades. This wheel offers high material removal rates and good form retention.

3M Diamond Resin Wheel 664BI is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to be free cutting and provide good form retention. For use with water based lubricants.

3M Cut-Off Wheel 664BL is used to trim carbide cutting tool blanks to length for the cutting tool manufacturing industry.

3M Diamond Resin Wheel 664BK is used for high performance grinding of carbide cutting tools. It has superior form retention and runs with water-based coolant. From 100 to 400 mesh grits and dual grit – (120/320).

3M Diamond Resin Wheel 634AH is a general purpose wheel designed for the production and re-sharpening of tungsten carbide-tipped saw blades. This wheel offers high material removal rates and good form retention.

3M Cloth Belt 707E uses a 3M Ceramic Aluminum Oxide Abrasives blend and is designed for light to moderate-pressure stock removal and finishing operations when you need a conformable belt for contoured surfaces. The belt is constructed with a blend of 3M Ceramic Abrasive Grain and premium aluminum oxide to offer more durability and cutting efficiency over non-ceramic abrasives.

When traditional aluminum oxide belts aren’t cutting it, try 3M Cloth Belt 577F with alumina zirconia abrasive grain. It offers increased cutting efficiency compared to aluminum oxide, and has a heavy, water-resistant polyester backing that stands up to high-pressure applications and edge work.

The 3M Microfinishing Film Roll 362L quickly cuts, shapes and polishes, delivering close-tolerance finishes for precision tooling and machining applications. Available in 9-100 micron grades, aluminum oxide is electrostatically oriented and bonded to a polyester film backing. A Type S (smooth) backsize coating provides slip resistance for microfinishing machines.

The 3M Microfinishing Film Roll 362L quickly cuts, shapes and polishes, delivering close-tolerance finishes for precision tooling and machining applications. Available in 9-100 micron grades, aluminum oxide is electrostatically oriented and bonded to a polyester film backing. A Type S (smooth) backsize coating provides slip resistance for microfinishing machines.

3M Hookit Microfinishing Film Disc 268L is a fast-cutting abrasive for precise, uniform, close-tolerance finishes. An aluminum oxide mineral is resin-bonded to a 3 MIL, high-strength polyester film backing for durability. This disc is ideal for defect repair and leveling, paint prep and final finishing.

3M Microfinishing Film Belt 372L is designed to help you get the finest finish possible, and is available in a wide variety of forms. It features micron-graded aluminum oxide abrasive bonded to a durable polyester film backing to produce a fast cut-rate and uniform finish on composites, plastic, fiberglass and metal.

3M Microfinishing Film Belt 472L was designed for superfinishing and powertrain microfinishing. This belt helps achieve uniform, consistent finishes on parts where close tolerances are important.