3M™ Trizact™ Hookit™ Foam Abrasive 3000 Sheet 443SA, 30290, 2-3/4 in x 5-1/2 in (70 mm x 140 mm), 15 Sheets/Carton, 4 Cartons/Case

• Reduce the need for aggressive compounding with 3000-grade 3M™ Trizact™ Hookit™ Foam Abrasive Sheets for paint finishing.
• Suitable for both machine and hand applications, these 3000-grade 3M™ Trizact™ Hookit™ Foam Abrasive Sheets help increase shop productivity by eliminating the need for aggressive wool compounding pads and reducing polishing time.
• Compared to traditional buffing, using 3M™ Trizact™ Abrasives for removing sand scratches can reduce the possibility of swirl marks, burn through, and other defects caused by more aggressive processes.
• 3M™ Trizact™ abrasives have unique three-dimensional abrasive structures which are distributed across the abrasive surface. As the structures wear, fresh mineral is exposed, delivering consistent finishes and longer sheet life.
• Used damp, they deliver long life and less loading than dry sanding.
• Foam backing provides plenty of control and consistent contact with the surface – great for preserving orange peel.
• Allows technicians to refine paint scratches using a lighter orbital sander instead of a heavier polisher
• When used with other 3M™ Trizact™ abrasives and a 3M™ Perfect-It™ Paint Finishing system, they can reduce overall polishing time.
• Available in 3-, 5-, and 6-inch diameter discs as well as 2 3/4 x 5 1/2-inch sheets.

Spend less time compounding and enjoy less risk of defects by using 3M™ Trizact™ Hookit™ Foam Abrasive 3000 Sheet 443SA for paint finishing. Used for refining 1500- and 2000-grade sand scratches, they can reduce the need for aggressive wool compounding and cut overall paint finishing time. The patented 3M™ Trizact™ abrasives are engineered for consistent cut and long life.

You’ll see long abrasive life and consistent finishes thanks to the patented 3M™ Trizact™ Abrasives. They are built with our unique three-dimensional structures which wear to reveal fresh, sharp abrasive mineral. 3M™ Trizact™ Hookit™ Foam Abrasive 3000 Sheet 443SA can reduce the risk of heavy swirl marks, which can be introduced during aggressive compounding. Used damp, they deliver the anti-loading benefits of wet sanding without the productivity-reducing hydroplaning which can happen when power sanding on overly wet surfaces The foam backing provides plenty of control and consistent contact with the surface – great for preserving orange peel. Can be used with a soft interface pad for added conformability over curved surfaces. When used with other 3M™ Trizact™ abrasives and one of the 3M™ Perfect-It™ Paint Finishing Processes, they can reduce overall polishing time. 3M™ Trizact™ Hookit™ 3000-grade Foam Abrasives are available in 3-, 5-, and 6-inch diameter discs and 2 3/4 x 5 1/2-inch sheets.