Blog

3M Foam Fast 74 CA Orange Spray Adhesive – Low VOC <25% is a fast-drying spray adhesive that bonds foam and fabric to a wide range of substrates. The permanent bond provides fast results to keep projects moving ahead, with a non-yellowing formula that dispenses easily in a lace-spray pattern and applies directly onto surfaces and materials where needed.

3M Industrial Adhesive 4799 provides a reliable bond for EPDM and rubber applications. Resistant to heat and water, this industrial adhesive delivers the durability you need and can depend on for years to come.

3M Fast Tack Water Based Adhesive 1000NF is a unique, water-based adhesive specially designed to deliver an effective combination of fast, heat resistant bonding, repositionability, and high ultimate strength. Its adhesive is non-flammable, polychloroprene-free, and has zero VOCs (per EPA test method 24).

3M Fastbond Spray Activator 1 is used to enhance the bonding capabilities and handling strength without forced drying equipment for most applications. It is designed to specifically work with water based 3M Fastbond 2000NF Adhesive, 3M Fastbond Contact Adhesive 30NF and 3M Fastbond Foam Adhesive 100NF.

3M Cylinder Adhesive Spray Tips control your adhesive output from 2 to 18 inches. Proper spray patterns provide uniform coverage and consistent drying times to help keep projects moving forward.

3M Neoprene Contact Adhesive 5 is a versatile, solvent based adhesive with a low viscosity for spraying. It offers high immediate handling strength and good heat resistance, and is commonly used for bonding most metals and plastics. It is also suitable for large surface panel or composite lamination.

3M Fastbond Contact Adhesive 30NF is a low-odor, water-based adhesive designed to deliver a high-strength, high-coverage bond with a bonding range of 4 hours. Post-formable and high-temperature-resistant, this adhesive is non-flammable in the wet state. 3M Fastbond Contact Adhesive 30NF is proven to bond combinations of most foamed plastics, plastic laminate, wood, plywood, wood veneer, and canvas.

3M Nitrile High Performance Plastic Adhesive 1099L dries quickly with an open time of approximately 40 minutes. Its assembled bonds are proven to be strong while resisting weathering as well as damage from water, oil and fuel. Additionally, it bonds well to plastics and vinyl, providing long-term adhesion as well as good resistance to plasticizer migration.

3M Scotch-Weld Aesthetic Structural Material AS402GG01 is a one-part, color-matched epoxy designed to enhance the design flexibility of electronic devices. It offers strong chemical adhesion and seamless joining for aluminum, titanium, and more. With excellent impact resistance and durability, the ability to withstand water exposure up to 100 meters, and resistance to chemicals, it helps provide a premium device appearance and tactile feel.

3M OEM Match Wide Stream Tips help technicians replicate the appearance of wide or flat seam sealers that were robotically applied at the OEM factory. Used with one-part (1K) and two-part (2K) seam sealers, the tip can be trimmed to control the bead width.

3M Scotch-Weld Composite Surfacing Film AF 325 LS White is a thermosetting epoxy that 3M developed as an excellent product for surfacing composites, where its smooth, void-free surface with minimal pinholes reduces the need for subsequent surface fill or finishing and pre-paint prep. It includes copper mesh for lightning strike protection.

3M Tape Primer 94 can be used to improve the overall adhesion of tape, film and vinyl graphics to polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces.