Blog

3M Scotch-Weld Aesthetic Structural Material AS001BU01 is a two-part color-matched epoxy designed to enhance the design flexibility of electronic devices. It offers strong chemical adhesion and seamless joining for aluminum, titanium, and more. With excellent impact resistance and durability, the ability to withstand water exposure up to 100 meters, and resistance to chemicals like sweat and household cleaners, it helps provide a premium device appearance and tactile feel.

3M Scotch-Weld Epoxy Adhesive DP420LX Off-White is a toughened, two-part epoxy structural adhesive that provides good strength along with high impact and fatigue resistance to meet demanding bonding challenges. 3M Scotch-Weld Epoxy Adhesive DP420LX can replace mechanical fasteners, screws, rivets and spot welds in many applications.

3M OEM Seam Sealer Tip Adapter allows operators to use 3M OEM Seam Sealer with select 3M Sealers. This adapter allows technicians to use 1-part seam sealers to match OEM seams, without the need for two-part application equipment.

3M Scotch-Weld Aesthetic Structural Material AS402GG01 is a one-part, color-matched epoxy designed to enhance the design flexibility of electronic devices. It offers strong chemical adhesion and seamless joining for aluminum, titanium, and more. With excellent impact resistance and durability, the ability to withstand water exposure up to 100 meters, and resistance to chemicals, it helps provide a premium device appearance and tactile feel.

3M OEM Match Ripple Tips help technicians replicate the appearance of textured OEM seam sealers that were robotically applied at the factory. Available in two styles, they fit a wide variety of 1-part and 2-part seam sealers.

3M Hi-Tack Composite Spray Adhesive 71 is a high tack spray adhesive ideal for use in a wide variety of composite production applications. Featuring fast tack and high strength with excellent shear holding power, it will bond fiber, fabric, wood and much more. Available in clear, or in green for better visual control, this adhesive meets CARB and OTC VOC requirements.

3M Neoprene High Performance Contact Adhesive 1357 is a versatile, solvent-based adhesive that offers fast handling strength, water resistance, and high-temperature performance up to 250 °F (121 °C). While commonly used for bonding most metals and plastics, it is also suitable for large surface panels or composite lamination. This adhesive dries quickly while allowing time for positioning and adjustments, making it ideal for applications involving materials such as metal honeycomb composite, stainless steel, and wood panels.

3M Foam Fast Spray Adhesive 74 CA Low VOC <25% is a fast-drying adhesive that bonds foam and fabric to a wide range of substrates. While offering an aggressive tack with a high initial grab and foam-tearing strength, this adhesive allows sufficient open time to position materials properly thanks to its high-solids content and low soak-in properties. It also provides high coverage and helps create soft, non-dimpling glue lines. Additionally, 3M Foam Fast Spray Adhesive 74 CA Low VOC <25% dispenses easily in a lace-spray pattern and applies directly onto surfaces, making it a quick, 'go-to', everyday-use solution. This product meets the applicable 2017 California Air Resource Board VOC limits for mist and web spray adhesives.

3M Yellow Super Weatherstrip and Gasket Adhesive securely bonds rubber gaskets and weatherstripping to metal surfaces. This flexible, high-strength adhesive…

3M ACF 7303 is an epoxy/acrylate-blend adhesive system filled with 43 micron silver-coated glass beads. It is slightly tacky at room temperature and cures at modest bonding temperature and pressure.

3M Hi-Strength 94 ET Spray Adhesive Aerosol – Low VOC <20% creates an aggressive postformable bond for attaching decorative laminate, metal and some rubber substrates. This high strength adhesive is typically used in woodworking and specialty vehicle applications, especially where VOCs are a concern. The adhesive can be sprayed, rolled or brushed onto surfaces to reduce overspray and adhesive waste.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ Heat Shrink Tubing EPS-300 is a dual wall tubing provides the advantage of an integral, adhesive lined construction. This flame retardant tubing with a 3:1 shrink ratio offers insulation for 600V rated applications. The flexible polyolefin construction features an internal layer of thermoplastic adhesive, which offers moisture seal protection in automotive and marine applications.