Blog

3M EMI Absorber AB1000 and AB1000B Series consists of a flexible, soft metal flakes filler loaded in polymer resin and acrylic pressure sensitive adhesive. This halogen-free, flexible, magnetic EMI absorber is a high frequency absorber for applications in the 3 GHz – 6 GHz range.

3M Bumpon Protective Product SJ6553 is a self-adhesive rubber bumper designed to be used as feet, stops and spacers. The hexagonal base design with cone shaped top used in woodworking as cushioning stop.

3M Bumpon Protective Product SJ5510 series is a self-adhesive rubber bumper designed to be used as feet, stops and spacers. It is a molded continuous strip used when custom length applications are required.

3M Thermally Conductive Silicone Interface Pad 5519 is a highly conformable, slightly tacky silicone elastomer pad. Designed to provide heat transfer path between heat generating components and heat sinks, heat spreaders or other cooling devices.

3M EMI Absorber AB6005S is a shielding absorber consisting of an insulation layer, shielding layer, absorbing layer and non-conductive pressure-sensitive adhesive.

3M Circuit Plating Tape 1280 with polyester film used for PCB masking tape or other high temperature applications. Red. 3.6 mil thick.

3M Thermally Conductive Interface Tape 8926-02 is a 0.20 mm pressure-sensitive tape designed to have good converting ability, handing and re-workability through the introduction of a thin PET carrier. 3M tape Series 8926 is designed with a soft acrylic polymer and multiple thickness options to allow excellent wet-out or conformability to many surfaces.

3M Wafer De-Taping Tape 3305 is a transparent polyester film with an adhesive specifically designed for the removal of the 3M WSS adhesive from the surface of the device wafer after the carrier glass is separated from the silicon wafer.

3M Lapping Film Sheet 261X is the standard of 3M’s lapping films. The product is made from precisely graded aluminum oxide particles coated on a 3 mil polyester film. The product provides uniform finishes on various substrates and delivers consistent cut rate, finish and life.

3M Thermally Conductive Interface Tape 8926-02 is a 0.20 mm pressure-sensitive tape designed to have good converting ability, handing and re-workability through the introduction of a thin PET carrier. 3M tape Series 8926 is designed with a soft acrylic polymer and multiple thickness options to allow excellent wet-out or conformability to many surfaces.

ISOLOSS LS materials are fine-celled, low compression-set, high density polyurethane foams, offering unique combinations of design features for difficult mechanical energy control problems. ISOLOSS LS products exhibit very low compression set and excellent resistance to collapse as well as good shock absorption and vibration isolation performance. They also feature low outgassing and good dimensional stability. ISOLOSS LS foams provide excellent shock control and cushioning, yet are durable enough for gasketing, padding and sealing applications.

ISOLOSS LS materials are fine-celled, low compression-set, high density polyurethane foams, offering unique combinations of design features for difficult mechanical energy control problems. ISOLOSS LS products exhibit very low compression set and excellent resistance to collapse as well as good shock absorption and vibration isolation performance. They also feature low outgassing and good dimensional stability. ISOLOSS LS foams provide excellent shock control and cushioning, yet are durable enough for gasketing, padding and sealing applications.