Blog

For Industrial Use Only. Estimated Lead Time Is 10 Working Days.

3M™ Aluminum Foil Tape 3380 features a nominal 1.8 mil aluminum foil coated with a pressure sensitive, cold weather acrylic adhesive. This tape combines flexible foil for irregularly-shaped applications and excellent low temperature performance. It conforms to fibrous duct-board and sheet metal ducts and works well in general-purpose heat shielding and light reflecting applications.

UL 723 listed. US Coast Guard approved for interior finishes. The foil serves as an excellent barrier against moisture, dust, flame, and certain chemicals. Acrylic adhesive supplies superior temperature, U.V. and solvent resistance.

For Industrial Use Only.

Estimated Lead Time is 5 Working Days.

3M™ Double Coated Tape 9500PC, Clear, 1 in x 36 yd, 5.6 mil, 36 Roll/Case

3M™ Double Coated Tape 9500PC is an adhesive that excels on low surface energy (LSE) substrates and at high temps. Sold by JAM Industrial Supply, a Premier 3M Distributor.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ Double Coated Tape 9500PC is a 5 mil (0.14 mm) 350 high performance acrylic adhesive double coat with a thin polyester carrier film on a 58#, 4.5 mil unprinted, polycoated kraft paper liner.

2.0 mil polyester carrier for improved dimensional stability. Use to laminate high performance plastics and difficult substrates.

For Industrial Use Only. Out of Stock From 3M Until after 2/14/2023.

3M™ Extra Heavy Duty Duct Tape 6969 is an economical tape featuring industrial strength, easy hand tearability and abrasion resistance. It offers 60-day clean removal for indoor applications.

3M™ Extra Heavy Duty Duct Tape 6969 offers industrial strength backing, easy tear, abrasion resistance and tack-free edges. Individual roll wrap preserves integrity of the roll for less waste. The rubber adhesive adheres aggressively to most surfaces for good holding power. Typical physical and performance characteristics include: thickness: 10.7 mils, adhesion to steel: 61 oz./in. width, tensile strength: 32lbs./in. width, elongation at break: 16%, temperature use range: Up to 200°F.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ Extra Heavy Duty Duct Tape 6969 is an economical tape featuring industrial strength, easy hand tearability and abrasion resistance. It is also moisture resistant with a tack-free roll edge.

For Industrial Use Only. Estimated Lead Time For This MAKE TO ORDER Item Is 20 Working Days.

3M™ Chemical Sorbent Roll C-RL15150DD can be easily cut to cover small areas or fit tight corners. Rolls of sorbent material are used for large spill management or in areas where spills may occur. May be used to cover bench tops in prep for a spill or as a work surface.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ Particulate Respirator 8511, N95 is a disposable particulate respirator that is designed to help provide reliable respiratory protection of at least 95 percent filtration efficiency against certain non oil-based particles. This respirator is designed for use to help reduce exposure to certain airborne particulates such as coal, silica, iron ore, metal, wood, and biological particles.

For Industrial Use Only. Estimated Lead Time For This Non-Returnable MAKE-TO-ORDER Item Is 5 Working Days.

3M™ Doodlebug™ Utility Pad 8242 is for medium duty cleaning tasks such as cleaning stairs. This utility pad is extremely durable and can scrub a wide variety of materials, including vinyl tile, sheet vinyl, terrazzo, concrete and marble.

For Industrial Use Only.

Estimated Lead Time for This Non-Returnable MAKE TO ORDER Item is 5 Working Days.

3M™ Doodlebug™ Utility Pad 8541, Brown, 4-5/8 in x 10 in, 10/Case

The 3M™ Doodlebug™ Utility Pad 8541 is a heavy-duty utility pad for tough jobs including removing finish and wax from baseboards, floor edges and stairs. Sold by JAM Industrial Supply, a Premier 3M Distributor.