Blog

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ Performance Spray Gun H/O Conversion Pack for the 3M™ Performance Spray Gun gives more application control of heavy or texture coatings.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

The 3M™ Performance Spray Gun is made from an advanced impact-resistant composite material, the spray gun is one of the lightest in the industry yet durable enough for the toughest industrial conditions. From the trigger to the body, the spray gun was optimized to enhance comfort specifically for the high demands of all-day spraying.

Kit includes:

• a 3M™ Performance Spray Gun
• an air control valve.

For Industrial Use Only. Estimated Lead Time Is 15 Working Days.

3M™ Interam™ Endothermic Mat E-5A-4 is an easy-to-install heat-absorbing wrap system that provides excellent fire resistance for structural steel components, critical electrical components and wall opening membranes. When exposed to intense heat, the mat releases chemically-bound water to cool its outer surfaces.  Fire rated 4 hours.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

Series 270 can be applied early and late season, down to 40°F (4°C), with use of 3M™ Stamark™ Surface Preparation Adhesive P-50 or 3M™ Stamark™ Low VOC Surface Preparation Adhesive SPA60.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ Stamark™ Pavement Marking Tape A270ES can be applied early and late season, down to 40°F (4°C).  Use with 3M™ Stamark™ Surface Preparation Adhesive P-50 or 3M™ Stamark™ Low VOC Surface Preparation Adhesive SPA60.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ Stamark™ Pavement Marking Tape A270ES can be applied early and late season, down to 40°F (4°C).  Use with 3M™ Stamark™ Surface Preparation Adhesive P-50 or 3M™ Stamark™ Low VOC Surface Preparation Adhesive SPA60.

For Industrial Use Only. Estimated Lead Time Is 2 Working Days.

3M™ Stamark™ Pavement Marking Tape A270ES can be applied early and late season, down to 40°F (4°C).  Use with 3M™ Stamark™ Surface Preparation Adhesive P-50 or 3M™ Stamark™ Low VOC Surface Preparation Adhesive SPA60.

For Industrial Use Only. Available December 2025. 

3M File Belt Sander 28366 is ideally suited for a variety of metalworking applications. Grind and blend and finish hard-to-reach areas with power and efficiency.

For Industrial Use Only. Estimated Lead Time Is 15 Working Days.

3M™ Cubitron™ II Stikit™ Film Disc 775L features 3M Precision Shaped Ceramic Grain. The triangular shaped ceramic mineral is designed to slice through the substrate, rather than gouging or “plowing” like conventional abrasives, resulting in a disc that cuts up to 2x as fast and lasts up to 6x as long as conventional abrasives.

For Industrial Use Only. Estimated Lead Time On This Make to Order Belt Is 9 Working Days.

3M™ Trizact™ Cloth Belt 307EA uses proprietary microreplication technology where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a rayon backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

For Industrial Use Only. Lead time on this Make To Order Item is 10 working days.

3M™ Trizact™ Cloth Belt 217EA uses proprietary micro-replication technology in which micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a JE-weight rayon backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

For Industrial Use Only. Lead time on this Make To Order Item is 10 working days.

3M™ Trizact™ Cloth Belt 217EA uses proprietary micro-replication technology in which micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a JE-weight rayon backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.