3M™ Dirt Trap Clear Film, 36856, 18 in x 100 ft

Product Description

Advantages of 3M™ Dirt Trap Clear Film

• Protects against transfer of dirt, dust and overspray without blocking natural light
• Reduces labor and costs related to removing dirt and overspray from paint booth lights and windows
• Clear adhesive backing keeps material secure on vertical surfaces
• Applies quickly and removes cleanly for time and cost efficiency
• Part of the 3M™ Dirt Trap Surface Protection System for body shops and industrial facilities

3M™ Dirt Trap Clear Film Protection Material is a specially engineered covering material that protects windows and other openings where paint or dust can accumulate, without blocking natural light. This material can also be used to cover openings, preventing drift of dust and overspray. A clear adhesive backing keeps it secure, smooth and wrinkle free, and removes without residue.

Clear Film Protects Windows Without Blocking Light
Developed as part of the 3M™ Dirt Trap Surface Protection System, 3M™ Dirt Trap Clear Film Protection Material traps dust, dirt and paint overspray on windows and other clear openings without blocking natural light in the shop. This clear, durable film saves you the costs of paint and dirt removal from windows, where it can interfere with the work environment. Simply apply it to glass, plexiglass or to the walls surrounding the opening. A clear, low-tack adhesive keeps the film firmly in place. When you’re ready to replace it, the film peels off cleanly without leaving adhesive residue.

Directions For Installing 3M Dirt Trap Clear Film

• Important – Scrape and clean glass surfaces thoroughly before installation

• Cover the edge of the installation squeegee with 3M™ Dirt Trap material to reduce the drag on the clear film
• Place dispenser (3M PN 36863; JAM PN 3MABR-7100173136; sold separately) below the window or light
• Pull film up and over glass and use the squeegee to apply
• Start at the top near the center and work out to the edges as you smooth and remove air pockets and wrinkles
• Trim edges with a cutter
• Optional – Installation may be done using glass cleaner or water/alcohol solution to improve film handling.
• Replace film when heavily coated with overspray