Blog

For Industrial Use Only. Estimated Lead Time Is 15 Working Days. 

3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 Black is a toughened two-part, room-temperature curing acrylic adhesive specially formulated to bond oily metals, plastics, and other surfaces. With lower odor and non-flammable properties, 3M™ Scotch-Weld™ Acrylic Adhesive DP810 contributes to a safer work environment compared to typical acrylic adhesives.

For Industrial Use Only. Estimated Lead Time is 5 Working Days.

3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 is a toughened two-part, room-temperature curing acrylic adhesive specially formulated to bond oily metals, plastics, and other surfaces. Color: TAN

For Industrial Use Only. Estimated Lead Time on the MAKE TO ORDER Tape Is 15 Working Days.

3M™ Paint Masking Tape 231/231A is a premium high-performance crepe paper masking tape designed to perform well in most industrial painting situations, including the use of multiple bake cycles. The smooth masking tape embodies all the features that are desirable in a paint masking tape and is designed specifically for professional painters in the aerospace and automotive market.

For Industrial Use Only.

Estimated Lead Time Is 5 Working Days.

Scotch-Brite™ Clean and Finish Roll, CF-RL, A/O Very Fine, 4 in x 30 ft, 3 ea/Case

The Scotch-Brite™ Clean and Finish Roll delivers consistent results for finishing, blending, polishing, and cleaning on a variety of metals, wood, plastics surfaces as well as hard-to-reach areas. Sold by JAM Industrial Supply, a Premier 3M Distributor.

For Industrial Use Only. Estimated Lead Time On This Make to Order Belt Is 9 Working Days.

3M™ Trizact™ Cloth Belt 307EA uses proprietary microreplication technology where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a rayon backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

For Industrial Use Only. Available September 2025.

3M™ Fire Barrier Sealant CP 25WB+ is a red, one-component, gun-grade, latex-based, intumescent firestop sealant. This fire barrier sealant helps control the spread of fire, smoke and noxious gases before, during and after exposure to a fire.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ Diamond Grade™ School Bus Markings 983-71NL makes school transportation safer by enhancing school bus visibility, especially during early morning and evening hours.

For Industrial Use Only. Estimated Lead Time Is 5 Working Days.

3M™ Cubitron™ II Cut-Off Wheel features 3M Precision Shaped Ceramic Grain to bring you an exceptionally fast-cutting and long-lasting wheel for use on almost all materials, including stainless steel, mild steel, and aerospace alloys. This cut-off wheel surpasses 3M™ High Performance wheels in both cut and life to deliver significant gains in productivity.

For Industrial Use Only. 

Estimated Lead Time Is 5 Working Days.

3M™ Cubitron™ II Stikit™ Film Disc 775L, 320+, 5 in x NH, Linered w/Tab, Die 500X, 50/Carton, 250 ea/Case

The 3M™ Cubitron™ II Stikit™ Film Disc 775L is ideal for a broad range of applications focused primarily on stock removal, and are effective on a wide variety of substrates, including metals, composites, gelcoat, and whitewood. Sold by JAM Industrial Supply, a Premier 3M Distributor.

For Industrial Use Only.

Estimated Lead Time Is 5 Working Days.

3M™ Cubitron™ II Stikit™ Film Disc Roll 775L, 320+, 5 in x NH, Die 500X

3M™ Cubitron™ II Stikit™ Film Disc 775L features 3M Precision Shaped Ceramic Grain, a revolutionary advancement in abrasive technology. The triangular shaped ceramic mineral is designed to slice through the substrate, rather than gouging or “plowing” like conventional abrasives, resulting in a disc that cuts up to 2x as fast and lasts up to 6x as long as conventional abrasives.

For Industrial Use Only.

Estimated Lead Time Is 5 Working Days.

3M™ Cubitron™ II Stikit™ Film Disc Roll 775L, 220+, 5 in x NH, Die 500X, 100 Discs/Roll, 4 Rolls/Case

The 3M™ Cubitron™ II Stikit™ Film Disc Roll 775L is ideal for a broad range of applications focused primarily on stock removal. They are also effective on a wide variety of substrates, including metals, composites, gelcoat, and whitewood. Sold by JAM Industrial Supply, a Premier 3M Distributor.

For Industrial Use Only.  Estimated Lead Time Is 2 Working Days.

3M™ Pro Grade Precision™ Faster Sanding Sanding Block Sponge is ideal for sanding painted surfaces and resists loading which allows for larger sanding coverage. The sponge lasts longer than conventional sandpaper to last from start to finish of sanding projects.

READ MORE