Blog

The 3M Cold Shrink Splicing Products are designed using the proprietary cold shrink delivery system developed by 3M.

3M Direct Bury Splice Kits combine the quick, reliable connection of a 3M Performance Plus Wire Connector with the moisture resistance of a high impact, UV resistant tube prefilled with moisture resistant grease.

3M Scotchlok UF Series Standard Splice Kits include all the accessories required to offer a reliable, moisture proof electrical connection for type UF B underground feeders. These kits are suitable to use on 600V rated, flat, non shielded UF cables.

3M Fastbond Spray Activator 1 is used to enhance the bonding capabilities and handling strength without forced drying equipment for most applications. It is designed to specifically work with water based 3M Fastbond 2000NF Adhesive, 3M Fastbond Contact Adhesive 30NF and 3M Fastbond Foam Adhesive 100NF.

3M Scotchcast Re-Enterable Electrical Insulating Resin 2123 is a soft, two-part polybutadiene resin encapsulant. This resin has good handling and performance characteristics and is formulated for re-enterable splice protection. This multi purpose, moisture sealing resin bonds to nearly all cable jackets.

3M No Cleanup Applicator Gun is a high-performance applicator gun designed for use with 3M No Cleanup products (sold separately). This unique siphon-feed applicator gun offers a convenient and inexpensive means for spraying low-viscosity solutions contained within the Cleanup cans.

3M Accuspray HVLP Test Air Caps let auto body professionals easily and accurately test 3M Accuspray spray guns for performance and HVLP compliance.

The 3M Accuspray ONE Spray Gun System with Standard PPS Series 2.0 combines the simplicity and easy maintenance of the Accuspray spray gun with the material-saving, rapid clean-up convenience of PPS Series 2.0, the next generation, highest performing disposable spray cup system. Replaceable atomizing heads afford the performance of a new gun, on demand and at a fraction of the cost.

The 3M Performance Water-Based Cylinder Spray Applicator is designed to work with the Water-based cylinder system. The spray applicator kit includes 1 spray applicator, 3 replacement nozzles, 1 cap, 2 gaskets and 3 stainless steel metal tips (9501, 6501, 650050).

Lightweight and easy to use, the 3M Performance Spray Gun was built for the industrial painter. Made from impact-resistant composite, it is one of the lightest spray guns in the industry, yet durable enough for demanding conditions. Its versatile design allows spraying from a pressurized source or a gravity cup. Replaceable nozzles in a variety of sizes allow you to spray a wide range of coatings.

3M Performance Spray Gun Ball Valve is an accessory for the 3M Performance Spray Gun System configured as a pressure feed sprayer. The valve gives the spray gun operator the ability to stop the flow of paint from the pressure source (pot or pump) at the spray gun end of the supply hose. Recommended for use when the painter does not have easy access to the pressure source. Light and easy to use.

3M Performance Spray Gun Whip Pin is a replacement attachment pin for the 3M Performance Spray Gun Pressure Whip Hose. The clevis pins are used to secure the whip hose to the body of the 3M Performance Spray Gun. The connection helps give the painter additional control and helps prevent the atomizing head from twisting and unwanted stress.